0
solution loss reaction is occured in stack region , here CO2 react with solid C and give CO then it will good in term of producing reducing gas but at the same time it losses carbon in stack region which affected the permeability bed of coke and whole blast furnace operation depends on it .
What else can I help you with?
Why is iron extracted using blast furnace and not by thermit reaction?
Iron is typically extracted using a blast furnace because it allows for large-scale production of iron with high efficiency. The thermite reaction is not as practical for large-scale production as it involves a smaller scale reaction and can be difficult to control. Additionally, the blast furnace method allows for the extraction of impurities from the iron ore.
Which exothermic reaction causes the temperature to rise in the blast furnace in reduction of hematite using coke in the blast furnace?
The exothermic reaction that causes the temperature to rise in the blast furnace during the reduction of hematite using coke is the combustion of carbon (C) in coke with oxygen (O2) to produce carbon dioxide (CO2) and release heat energy. This reaction helps maintain the high temperatures necessary for the reduction of hematite to iron.
What substance are mixed with iron ore in the blast furnace?
Coke (a form of carbon) and limestone are mixed with iron ore in the blast furnace. Coke provides the heat source for the chemical reaction, while limestone helps to remove impurities from the iron ore.
What element is removed from chromium oxide in a furnace blast?
During the furnace blast process, oxygen is removed from chromium oxide (Cr2O3) to form metallic chromium (Cr) by a chemical reduction reaction.
Why is the coal unsuitable for charging directly in the blast furnace?
Coal is unsuitable for charging directly into a blast furnace because it contains impurities like sulfur and ash that can negatively affect the quality of the iron produced. When coal is used as a fuel in the blast furnace, it can lead to increased levels of impurities in the iron, affecting its properties. As a result, coke, which is a cleaner form of coal, is typically used in blast furnaces for iron production.
Why is iron extracted using blast furnace and not by thermit reaction?
Iron is typically extracted using a blast furnace because it allows for large-scale production of iron with high efficiency. The thermite reaction is not as practical for large-scale production as it involves a smaller scale reaction and can be difficult to control. Additionally, the blast furnace method allows for the extraction of impurities from the iron ore.
What is the German word for blast furnace?
Blast furnace = Hochofen
Which exothermic reaction causes the temperature to rise in the blast furnace in reduction of hematite using coke in the blast furnace?
The exothermic reaction that causes the temperature to rise in the blast furnace during the reduction of hematite using coke is the combustion of carbon (C) in coke with oxygen (O2) to produce carbon dioxide (CO2) and release heat energy. This reaction helps maintain the high temperatures necessary for the reduction of hematite to iron.
What is Blast Furnace?
A blast furnace is used to extract iron from its ore.
Why blast furnace called as blast furnace?
Its because air is forced into the furnace to increase temperature. Steve.
When was Govăjdia Blast Furnace created?
Govăjdia Blast Furnace was created in 1810.
What Is A Blast Furnace?
A blast furnace is a forge in which ore is smelted to meal, being intensified by a blast of hot air.
How does limestone coke and iron ore get into the blast furnace?
through the top of the blast furnace
Where is the Largest blast furnace of Asia?
'i' blast furnace of tata steel, jamshedpur,india
What do you all a furnace in a factory?
A blast furnace.
How is slag collected from a blast furnace?
iron is collected from blast furnace by drilling the taphole.Taphole is a hole drill and plug after cycle of time located in blast furnace bottom.
What is the volume of a blast furnace?
Useful Volume of Blast Furnace is the volume of the furnace from the throat level to the level where the taphole is placed. This is known the way basically because that is the region where the useful products from Blast furnace are present.
