That is not an easy answer but here goes! Baqualcil is not compatible with chlorine in any way shape or form so the best thing to do if you biguinide level is above 30ppm is to ride it down let if go until the level is 30ppm or lower. Take you pool water to a pool store and have it professionally analyzed. Once you are at that point you want to shock the pool with 3 pounds of monopersulfate per 10,000 gallons of pool water 3 days in a row. Then have the water check again at the pool store to make sure your level is below 10ppm. Once this is done add 3 pounds of calcium hypochlorite per 10,000 gallons of pool water. Make sure the shock is at least 65% available chlorine or higher. The pool will turn green do no panic! Next, if you have a sand filter, change the sand in the filter. If you have a DE filter use a chemical cleaner that is designed to clean biquinide filters, if you have a cartridge filter do the same as a DE filter. Now it is time to start using chlorine tablets. Keep in mind that every time you shock the pool for the next 2-3 times the pool will turn a light green then go to blue overnight this will slow go away over time.
It is generally not recommended to mix chlorine bleach with soap. This can create toxic fumes and harmful chemical reactions. It is best to use them separately and follow the product instructions for proper use.
Yes, chlorine-free bleach is safe for colors. It is designed to be gentle on colored fabrics while still providing effective stain removal and brightening. Just be sure to follow the instructions on the product label for best results.
The molar mass of chlorine gas (Cl2) is 70.91 g/mol. To convert grams to moles, you divide the mass (84 g) by the molar mass (70.91 g/mol). So, 84 grams of chlorine gas is equal to approximately 1.18 moles.
Yes, chlorine can damage silver by causing it to tarnish and discolor. It can also lead to corrosion if silver comes into direct contact with chlorine. It is best to avoid exposing silver to chlorine, such as in swimming pools or when cleaning with chlorine-based products.
No, it is not recommended to mix OxiClean with chlorine bleach, as it can create harmful reactions. It is best to use each product separately and according to their specific instructions for optimal results.
I have found Proteam's System support product to be very effective against it. Hmmm, What are chlorine "loops"
A cup typically holds around 250 grams of granular chlorine, depending on the density of the chlorine granules. It is always best to check the specific packaging or label for the exact weight of the chlorine product you are using.
It is generally not recommended to mix chlorine bleach with soap. This can create toxic fumes and harmful chemical reactions. It is best to use them separately and follow the product instructions for proper use.
Yes, chlorine-free bleach is safe for colors. It is designed to be gentle on colored fabrics while still providing effective stain removal and brightening. Just be sure to follow the instructions on the product label for best results.
The molar mass of chlorine gas (Cl2) is 70.91 g/mol. To convert grams to moles, you divide the mass (84 g) by the molar mass (70.91 g/mol). So, 84 grams of chlorine gas is equal to approximately 1.18 moles.
The best and less costly speakers you could buy to convert you old stereo into a home theater surround sound system best depends on the brand and model and such of your original equpiment . Any store that sells this type of product would easily be able to help out in finding exactly what is right for your existing product to ensure everything hooks up right .
The best way to remove chlorine from water effectively is by using a water filter with activated carbon or by letting the water sit out in an open container for a few hours to allow the chlorine to evaporate.
No, you should not mix chlorine with Baquacil as they are not compatible chemicals. Mixing them together can cause a chemical reaction that may produce harmful or toxic fumes, and could also reduce the effectiveness of both products in maintaining water quality. It's best to follow the manufacturer's recommendations for each product separately.
Yes, chlorine can damage silver by causing it to tarnish and discolor. It can also lead to corrosion if silver comes into direct contact with chlorine. It is best to avoid exposing silver to chlorine, such as in swimming pools or when cleaning with chlorine-based products.
No, it is not safe for cats to drink water that contains chlorine. Chlorine can be harmful to cats if ingested in large amounts. It is best to provide cats with clean, fresh water that does not contain chlorine.
Magnablu by poolrite
chlorine