Cross linked polymers are made of 2 or more monomers whereas a simple polymer is made up of a single monomer.
Cross-linked clusters are clusters that are marked in the FAT or MFT as belonging to more than once file.
It affects the properties of a polymer by it being "combine" with sodium borate.
Plastics have stronger bonds between the polymer chains-thesemight be covalent bonds between the chains, or cross-linking bridges. These plastics have a higher melting point, are rigid and can't be stretched, as the cross-links hold the chains firmly together.Hope i helped :-)
polymers are classified into 5 types as follows: A))based on synthesis: 1)addition polymers 2)condensation polymers B))based on inter molecular forces: 1)fibers 2)elastromers 3)thermoplastics 4)thermosettings C))from source 1)natural polymers 2)synthetic polymers D))based on material 1)organic polymer 2)inorganic polymer E))based on structure 1)linear polymer 2)branched polymer 3)cross linked polymer F))based on the monomer 1)homo polymer 2)hetero polymer
Hope this helps: The absorbent pad is made of two essential elements: water-loving polymer and fibrous material. Microscopically the polymer molecules resemble long chains or ropes. Parts of the chemical ropes are made to interact with water molecules. When a big number of these polymer chains are cross linked they form a gel network that can be modified. The gel strength is like polymer and has the tendency to misshape. If the strength of the gel is too high, the polymer will not hold enough water. If the gel strength is too low, the polymer will misshape too easily and the distant particles in the pad will absorb the liquid too fast, forming gel that blocks the liquid from getting to the center pad particles.
covalent bonds between chains of molecules of a polymer or polymers, fastening the chains together. See also cross-linked polymer, under polymer.
what is the difference from unmodified wheat and cross-linked starch
Mono cross means the single suspension system also called as mono cross suspension . this is called as Mono cross.
covalent bonds between chains of molecules of a polymer or polymers, fastening the chains together. See also cross-linked polymer, under polymer.
This protein crosslinking consists of between primary amine (lysine) and sulfhydryl (cysteine) groups of proteinsand other molecules; which are available with different lengths and types of spacer arms.
what are the difference between clustering and cross enrollment
difference between cross section and block daigram
the difference between offer and counteroffer
Sodium tetraborate is more commonly known as borax. It is often used as a cross-linking molecule between polymer chains, making the polymer more rigid.
Occasionally, the chain of entries in the FAT becomes corrupted, resulting either in lost clusters or cross-linked clusters. Crossed-linked means more than one chain points to them. Lost clusters or lost allocation units means no chain in the FAT points to them.
Cross linking.
Cross-links usually occur when a polymer molecule is at a larger size. A larger sized molecule is held together by stronger covalent bonds, and henceforth the force between the molecules is stronger. As the force between the molecules gets stronger, more energy is needed to separate them, meaning the melting point increases.