0
What is the different between conical flask and volumetric flask?
Wiki User
∙ 13y ago
They both do something :)
Wiki User
∙ 11y ago
A conical flask has a flat bottom and sloping sides, typically used for mixing or storing liquids, while a volumetric flask has a rounded bottom and long neck, used to prepare solutions of known concentration with high accuracy. Volumetric flasks are calibrated to contain an exact volume at a specific temperature.
Wiki User
∙ 14y ago(the clue's in the name) One is conical and one is round-bottomed. A conical flask is better for sitting on a work surface as its base is flat. A round-bottomed flask is more often suspended i.e. over a heater of some sort.
Wiki User
∙ 13y agoa volumetric flask is a volume calibrated glass ware. It has a mark that indicates a certain volume e.g a mark at 100 ml, unlike graduated glass ware. It's also an accurate measure glass ware, i,e can be used in spectrophotometry. See image on related link
A conical flask on the other hand is graduated glassware But it's NOT accurate which means that when you measure a certain volume , it may vary a few mls above or below the chosen volume.
Wiki User
∙ 11y agoA volumetric flask is more accurate than a graduated cylinder. The only advantage the graduated cylinder has to a volumetric flask in measuring volume is that the graduated cylinder can measure many different volumes, whereas a volumetric flask only measures one volume. (You can have different volumetric flasks of different volumes, but you can only use it for that one volume. I.e. a 100mL volumetric flask can only accurately measure 100mL, and a 5mL volumetric flask can only accurately measure 5mL)
Wiki User
∙ 13y agoA Conical Flask is conical and a beaker is a cylinder.
A conical Flask has a long neck for stopping anything big to go through and a beaker has a lip.
Mon Seth
Wiki User
∙ 9y agoConical flasks (or Erlenmeyer flasks) are preferred because there's less chance of splashing. Beakers have wide mouths and flasks do not.
Gillian SAMU
Both are used to measure and hold chemicals i think :)
Anonymous
everybody is an idiot in this page
Add your answer:
Earn +20 pts
What is difference between erlenmeyer flask and volumetric flask?
Erlenmeyer flasks have a conical shape with a narrow neck, used for mixing, heating, and storing liquids. Volumetric flasks have a flat bottom with a long neck and a specific volume graduation mark, used for making precise volume measurements and preparing solutions.
Do you use titrant in conical flask?
Yes, the titrant is typically added to the analyte solution in the conical flask during a titration experiment. The conical flask serves as the container for the reaction between the titrant and the analyte solution, allowing for easy observation and measurement of the endpoint.
Is there any difference between conical flask and titration lask?
Yes, there is a difference between a conical flask and a titration flask. A conical flask is a general-purpose laboratory glassware used for mixing and heating liquids, while a titration flask, also known as a burette, is a specific type of flask used in a titration to measure the volume of a substance being added to a solution. Titration flasks are usually marked with volume measurements to accurately determine the amount of substance added in a titration.
Why is conical flask called conical flask?
The conical flask is named after its shape, which resembles a cone. It typically has a flat bottom, a conical shape, and a narrow neck. This design allows for easy swirling of liquids and helps in preventing splashing while mixing or reacting substances.
What is another word for triangular flask?
Another word for a triangular flask is a conical flask.
What is the name for a conical glass flask with a narrow neck and broad base?
Volumetric flask - used to prepare a standard solution in laboratory
Could a 25 ml volumetric flask be replaced by a 25 ml pipette to measure the solution poured into a conical flask for titration?
As the pipette is far more accurate than a flask by a factor 10 to 100 one should NOT use a volumetric flask except for standard volumes over 100 ml.
What is difference between erlenmeyer flask and volumetric flask?
Erlenmeyer flasks have a conical shape with a narrow neck, used for mixing, heating, and storing liquids. Volumetric flasks have a flat bottom with a long neck and a specific volume graduation mark, used for making precise volume measurements and preparing solutions.
Do you use titrant in conical flask?
Yes, the titrant is typically added to the analyte solution in the conical flask during a titration experiment. The conical flask serves as the container for the reaction between the titrant and the analyte solution, allowing for easy observation and measurement of the endpoint.
What is conical flask accuracy?
A conical flask is typically used for holding and mixing liquids in a laboratory setting. Its accuracy in measuring volumes is limited, as it lacks precise calibration markings like those found on a graduated cylinder or volumetric flask. For more accurate volume measurements, a more precise measuring device should be used.
What is a lab flask for?
there are many types of flasks present in chemistry lab. some can be accurate for volume measurment others for some different functions as storage for example flasks commonly present is " volumetric flask- erlenmeyer flask - florence flask " the volumetric is accurate method for volume measurement erlenmeyer or conical florence or rounded has the same functions "storage ,, stirring ,,heating ,,mixing " the only difference is the rounded one is less stable as the base is smaller
When you use a volumetric conical flask and pipette explain the accuracy aspects of this equipment?
A volumetric conical flask is used for accurate volume measurements due to its precise calibration markings, typically with an accuracy within ±0.05 mL. When paired with a pipette, which allows for the precise transfer of fluids, the overall accuracy of measurements is enhanced. However, proper technique, such as ensuring the meniscus aligns with the calibration mark and avoiding parallax errors, is crucial for achieving accurate results.
What is function of the volumetric flask?
A volumetric flask is used to contain a specific volume of liquid. It is generally used in chemistry.
Is there any difference between conical flask and titration lask?
Yes, there is a difference between a conical flask and a titration flask. A conical flask is a general-purpose laboratory glassware used for mixing and heating liquids, while a titration flask, also known as a burette, is a specific type of flask used in a titration to measure the volume of a substance being added to a solution. Titration flasks are usually marked with volume measurements to accurately determine the amount of substance added in a titration.
What is laboratory Erlenmeyer flask?
Erlenmeyer flask is a conical flask made from glass or plastic, uset to make chemical reactions, volumetric titrations, to collect fluids from filtration, distillation, etc. Some times these flaks are graduated.
Why is conical flask called conical flask?
The conical flask is named after its shape, which resembles a cone. It typically has a flat bottom, a conical shape, and a narrow neck. This design allows for easy swirling of liquids and helps in preventing splashing while mixing or reacting substances.
A conical container with celibration to heat liquid?
A conical flask.
