The viscosity of slag in a blast furnace typically ranges from 1 to 10 Pa.s (Pascal-seconds) at typical operating temperatures. Viscosity can vary based on factors such as temperature, composition of the slag, and other process conditions within the blast furnace.
The main products of a blast furnace are pig iron (used to make steel) and slag (a byproduct that is used in construction materials).
Slag is intentionally placed above the layer of iron in a blast furnace to create a protective barrier. The slag layer acts as insulation, preventing the molten iron from exposure to the air and preventing oxidation. This helps maintain the temperature needed for the iron to be extracted from the ores.
Limestone is used in the blast furnace as a flux material to help remove impurities such as silica, which would otherwise form a slag that interferes with the smelting process. When limestone is added, it combines with the impurities to form a molten slag that can be easily separated from the molten iron.
how does the blast furnace maintain the heat ?what is the function of CaCO3 ?how the slag protect the molten iron ?why does iron flow down to the bottom /how does the slag and molten iron get seperated ?what is use of waste gas /what is main impurity of iron in blast furnace ?
Lime is added to a blast furnace as a fluxing agent to help remove impurities, such as silica and phosphorus, from the iron ore. It also helps control the viscosity of the slag, which promotes better separation of the molten iron from the impurities. Additionally, lime helps maintain the desired chemical balance and temperature within the furnace for efficient iron production.
Limestone, dolomite, BOF slag, electric furnace slag, olivine
iron is collected from blast furnace by drilling the taphole.Taphole is a hole drill and plug after cycle of time located in blast furnace bottom.
ground granulated blast furnace slag
This is a mixture not a compound.
The main products of a blast furnace are pig iron (used to make steel) and slag (a byproduct that is used in construction materials).
High alumina fire bricks are commonly used in applications involving molten blast furnace slag due to their high refractoriness and resistance to thermal shock. These bricks are able to withstand the high temperatures and harsh conditions of the slag without deforming or deteriorating quickly.
The two liquids tapped off from a blast furnace are molten iron and slag. Molten iron is the main product, while slag is a byproduct that is formed from impurities in the ore.
because in a blast furnace the limestone removes unwanted substances as slag.
she does not stick around for breakfast!
Slag from a blast furnace is usually ground down and used as a cement substitute as it is re-use of a waste product - it is not used on its own in concrete as the chemical reaction will not produce the same strength as proper cement.
Slag is intentionally placed above the layer of iron in a blast furnace to create a protective barrier. The slag layer acts as insulation, preventing the molten iron from exposure to the air and preventing oxidation. This helps maintain the temperature needed for the iron to be extracted from the ores.
Slag is the waste which is skimmed off the top of the molten iron that comes out of the blast furnace. It is a mixture of calcium and magnesium compounds, plus other impurities such as iron oxide, but is mainly calcium silicate. The formula for calcium silicate is CaSiO3.