answersLogoWhite

0

Total moisture in coal refers to the moisture content present in the coal including surface moisture and inherent moisture. Inherent moisture, on the other hand, is the moisture that is chemically bound within the coal structure and cannot be removed by air drying. The difference between total moisture and inherent moisture is the amount of surface moisture in the coal.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

What are the types of Moisture content in coals?

There are two main types of moisture content in coal: inherent moisture, which is present within the coal particles themselves, and extraneous moisture, which is moisture that is on the surface of the coal particles. Inherent moisture is more difficult to remove and can impact the heating value of the coal, while extraneous moisture can be more easily removed through drying processes.


How do you calculate inherent and total moisture?

difference between inherent and total moisture?


What gcv of coal is it when it's gar is 3600 to3800?

GAR is ((100-total moisture)/ (100-inherent moisture)) x Calorific Value in ADB So all depends on the moisture. If we assumed total moist 25% and inherent 5% so the calorific value in ADB is (95%/75%) x GAR 3800 = 4800 Gross Calorific Value ADB So all depends on the moisture in the coal...


What is difference between fine coal moisture and inhereent moisture and free moisture?

Fine Coal Moisture: not familiar with this term. I assume it is the Total Moisture in the fine fraction of coal. Fine fraction or "fines" is sometimes defined as the -0.5 mm fraction. "Inherent Moisture" is a non-preferred term according to Australian Standard 2418-1995: Coal & Coke - Glossary of Terms. It is sometimes used to mean the moisture retained by a coal or coke sample, after it has attained equilibrium with the atmosphere to which it is exposed. "Inherent" is not a good word here because the atmosphere to which the sample is exposed is not normally controlled for temperature or humidity. Alternatively, "Inherent Moisture" is also used to mean "Equilibrium Moisture" = "Bed Moisture" = "In-situ Moisture", which is an ASTM test for moisture retained after the sample has attained equilibrium with an atmosphere of controlled humidity and temperature. These two usages of Inherent Moisture are not even approximately the same; the term is therefore ambiguous and should not be used. "Free Moisture" = "Surface Moisture" is the moisture that is lost by the coal or coke in attaining equilibrium with the air to which it is exposed (AS2418). This air would normally be at ambient temperature and humidity.


Difference between inherent moisture and total moisture?

Total moisture refers to the entire amount of water stored within a poruous medium. Inherrent moisture is the moisture that is stored within the pores of individual particles and can only be removed using thermal methods.


What is a soft brown coal with less moisture called?

A soft brown coal with less moisture is called bituminous coal.


Which coal has highest moisture content?

as peat(90% moisture) is not regarded a rank of coal so lignite is the lowest grade of coal containing moisture as high as 30%.


How do you calculate the net calorific value of steam coal?

To calcualte NCV you need calorific value on GAR, H on gar and Total moisture.


WHAT IS AS DRIED BASES AND AS RECEIVED BASES IN COAL?

As-dried basis in coal refers to the coal's composition when all moisture has been removed, while as-received basis includes the naturally occurring moisture content. As-dried basis is commonly used for comparing coal qualities, as it eliminates the variable of moisture content. On the other hand, as-received basis reflects the coal's properties as it is found in its natural state.


What form of coal burns the hottest?

Anthracite coal burns the hottest among the types of coal as it has the highest carbon content and lowest moisture content.


Is moisture and impurities removed by time and pressure as hard coal forms?

Yes, as hard coal forms from peat through a process of time and pressure, moisture and impurities are gradually removed. This transformation leads to the creation of coal with higher carbon content and a lower moisture and impurity content.


What is the difference between ARB and GAR in Coal Analysis?

ARB (as received basis) refers to the analysis of coal as it is received at the power plant, including the moisture content. GAR (gross as received basis) refers to the analysis of coal without adjusting for moisture content. So, GAR will have a higher value compared to ARB because it does not account for the moisture content that is present in the coal.