216 degrees
below 216 degrees
You must either increase the temperature of the liquid or decrease the pressure acting on the liquid (i.e., decrease the air pressure).
Boiling point of :F2 ------- 85.03 KCl ------ 239.11 KNH3 --- 240.00 KMore Information:Ammonia would condense at the highest temperature. Chlorine would run a very close 2nd.
The temperature decreases as the gas (vapour) turns back into a liquid. For instance, the hot water vapour from a kettle can be cooled so as to condense back into water.
Propane is a gas a room temperature if it is not compressed. However, if it put in a canister under high enough pressure, it will be a liquid even at room temperature. Propane is a liquid below -44 degrees F or if its compressed. Grill bottles are only fillid 80% full with liquid. so you can use the propane gas on the top of the bottle.
Evaporation.
As Dodecane boils at 216 degrees C so, the answer must be below 216 degrees C as if it was 216 degrees C then it would still be a gas and not a liquid.
Yes. It is the temperature at which a gas condenses into a liquid.
Generally speaking - if you lower the temperature of a gas, it becomes more dense. If the temperature is lowered sufficiently it will start to condense into a liquid.
Depend on what gas it is and at what pressure. Water turn to liquid at 100 C and 1 ATM and condense at 80 C if pressure is 0.5 ATM. Oxygen in air will condense to liquid at -183 C and Nitrogen at -196 C and 1 ATM.
Gas molecules are spread out. When they are placed under pressure they condense into a liquid.
When cooled enough it will condense into a liquid. The required temperature changes with the substance.
The temperature decreases as the gas (vapour) turns back into a liquid. For instance, the hot water vapour from a kettle can be cooled so as to condense back into water.
Type your answer As you start to compress the gas you will get an increase in pressure. As the pressure increases you will hit a point where you will start to condense liquid from the gas. (assuming heat generated is removed) As the pressure continues to increase the amount of gas present decreases and the amount of liquid increases. You will eventually reach a point where there is no gas present, only liquidhere...
A gas condenses into liquid phase if its cooled below its critical temperatureand pressurized. If pressure is above the gas triple point pressure, coolingis enough to condense the gas to liquid phase.A gas below its critical temperature is called a vapour.
The gas will condense and turn into a liquid.
yes, by getting it to condense
To melt refers to the transformation from solid to liquid (think ice to water) To condense refers to the transformation from gas to liquid (think steam to water)