The RED can be either Strontium Nitrate or Bismuth nitrate, and the GREEN is either Barium chloride or Boric Acid. Be careful with any/all nitrates around children as they can be poisonous.
It is closed to make a safety flame.
Make sure you are using the right chemicals and that all of your beekers and oher tools are CLEAN. That may be why it was green.
Yes, because the reaction creates carbon dioxide gas and if you pour that gas onto a flame it will make the flame go out.
First you must figure out if is a vented or non vented gas logs. Also you must inspect you fireplace to make sure it can use gas logs. Most fireplaces can use gas logs so you shouldn't face many changes.
you make sure that the nosel is covered otherwise it wont be a safe flame
Green flame cuz when the air hole is closed it is yellow and when it is open it is blue so when the colors are combined they make the green flame
globs are green cause they have chemicals in them that make them green. technically globs can be any color of the rainbow you just have to have the right chemicals
It is the characteristic colour of a barium flame.
There are the fiber flame retardant and the after finished flame retardant. Because the cost difference, the after finished flame retardant treatment is widely used in China. The two way to make the fabric flame retardant, 1. Add the fire retardant chemicals to the fiber by polymerization, blended, alloying, composite spinning, melt grafting to make the fiber flame retardant. 2. The coated flame retardant or padded the flame retardant chemicals to the fabric. This two way have two different flame retardancy. The best way is to make the modified treatment to the fabric by nano technology, which have low cost and permanent flame retardancy. And the fabric is also soft, which have get the world class standard. In general, the fiber flame retardant can take full advantage of the FR chemicals than the after finished FR fabric. It is more softer and have permanent flame retardant effects. But in the practive use, we usually use more than one chemicals or two kind of method at the same time to get the flame retardant effects. By YULONG textile
There are three basic reasons to treat wood with chemicals: to inhibit decay, to prevent insects from eating it, and to make it flame-retardant.
It depends of a burning material. Wooden logs make red, orange and yellow colors. Natural gas (methane) makes blue flame.
If nothing is added to the mixture and no flame is introduced externally it is called spontaneous combustion.
Nitrogen is the main chemical that makes your lawn green. There are many artificially produced chemicals and fertilizers used to keep lawns green but nitrogen is the basis. www.plant-care.com/lawn-fertilizing.html
no but the gekolos (green people with 3 eyes) are immune to flame
It's not the fuel, it's the copper filament in front of the flame. It's also how they make green fireworks.
melt the logs and make a cake base
You can make babies and kids sleepwear flame retartdant on your own as it involves a complex chemical treatment that is done in factories under strict conditions. You either need to look of sleepwear that is already flame retardant or buy or make sleepwear out of 100% cotton. Organic or natural cotton is even better as there are no dyes or chemicals in the fabric.