8
If the concentration of alcohol and water solution is 25 percent alcohol by volume, the volume of alcohol in a 200 solution is 50.
If the water being added is pure, and the solvent in the copper sulfate solution was water, then no, this should not result in a chemical reaction. The visual change is due to dilution of the solute
30 mL water.
H! Refer below to the formula of dilution: C1V1 = C2V2 Sample problem: How much water and how much 12 M HCl must be used to prepare 500 ml of a 1 M HCl solution? # Determine the volume of 12 M to be used using the dilution formula (12) (volume of 12 M) = (1) (500) volume of 12 M = (1) (500) / 12 = 41.7 ml 12 M # Determine the volume of water to add to it Total volume after dilution = volume of 12 M + volume of water added 500 = 41.7 + volume of water added 500 - 41.7 = volume of water = 458.3 ml of water to be added to the 41.7 ml of 12 M Regards, Dianne
Salt forms a solution when added to water.
You need 17 gallons for a 15% volume/volume mixture.
Nothing is "produced". You have merely increased the volume of water. You have not diluted it, and you have not formed a solution.
Volume percent (v/v %) is defined as: volume percent = [(volume of solute) / (volume of solution)] x 100% Volume percent is handy when preparing solutions of liquids. Concentration of a solution can be stated in volume percentages. Be aware that volume of solution is in formula denominator, not volume of solvent. Thus to get 10% v/v solution of ethanol in water you can take 10 ml of ethanol and add enough water to have total 100 ml of resulting solution. It is worth to mention volumes of solute and solvent cannot be simply added to get volume of solution. For instance if you add 10 ml of ethanol to 90 ml of water the volume of the solution will be less than 100 ml.
If the concentration of alcohol and water solution is 25 percent alcohol by volume, the volume of alcohol in a 200 solution is 50.
The total volume is a little decreased.
200 ml of solution is 40.5768271 teaspoons. Ignoring the volume of the 8gm of medication, each teaspoon would have 8gm/40.5768271 = 0.197156864gm = 197.156864 milligrams of medication. Note that we ignore the volume of the medication because (i) we don't know the exact volume of the medication, and (ii) we don't know to what extent it changes the overall volume of the solution when added to it (a cup of water with a teaspoon of sugar added to it, for instance, has the same volume (although more weight) as the the water before the sugar was added - the molecules of sugar slip into the empty spaces between the water molecules).
this is because water is having its own volume.
If the water being added is pure, and the solvent in the copper sulfate solution was water, then no, this should not result in a chemical reaction. The visual change is due to dilution of the solute
The volume of the resulting solution is actually increased. As a rule of thumb the extra volume is about 60% of the kg mass taken in litres.Example: 1 L water + 1 kg sugar will take 1 L + 0.60L = 1.6 L(with total mass of 2 kg solution)
30 mL water.
H! Refer below to the formula of dilution: C1V1 = C2V2 Sample problem: How much water and how much 12 M HCl must be used to prepare 500 ml of a 1 M HCl solution? # Determine the volume of 12 M to be used using the dilution formula (12) (volume of 12 M) = (1) (500) volume of 12 M = (1) (500) / 12 = 41.7 ml 12 M # Determine the volume of water to add to it Total volume after dilution = volume of 12 M + volume of water added 500 = 41.7 + volume of water added 500 - 41.7 = volume of water = 458.3 ml of water to be added to the 41.7 ml of 12 M Regards, Dianne
20 volume is 6% solution. To make it 3% solution just add same volume of water to the original 6% solution and you have double volume of 3% solution.