well at 100 ft you are at about 4 atmospheres pressure, so a gas would have about 1/4th the volume it did on the surface.
The volume of one mole of any gas at STP (Standard Temperature and Pressure) is approximately 22.4 liters. To convert this to cubic feet, we can use the conversion factor 1 liter equals 0.0353 cubic feet. Therefore, the volume of one mole of a gas at STP in cubic feet is approximately 0.791 cubic feet.
To calculate the volume percent concentration of propanol in the solution, we first need to find the total volume of the solution. This would be the sum of the volumes of propanol and water: 100 mL + 300 mL = 400 mL. The volume percent concentration of propanol in the solution is then calculated by dividing the volume of propanol by the total volume of the solution and multiplying by 100: (100 mL / 400 mL) * 100 = 25%. Therefore, the propanol concentration in the solution is 25% (v/v).
The volume percentage of argon in a gaseous mixture can be calculated using the ideal gas law equation, where the volume percentage of argon would be the volume of argon divided by the total volume of the mixture times 100.
The volume of a methyl group would be 100. The issue of a methyl group would be known as 18.
If the temperature of the gas is decreased to 100 K, and the pressure remains constant, the volume of the gas can be calculated using the ideal gas law equation: V1/T1 = V2/T2. Given V1 = 1.27 m^3 and T1 = 300 K, and T2 = 100 K, we can solve for V2: V2 = V1 * T2/T1. Plugging in the values gives V2 = 1.27 * (100/300) = 0.4233 m^3. Thus, the volume of the gas would be approximately 0.4233 m^3 if its temperature were decreased to 100 K while keeping the pressure constant.
To convert cubic feet to brass, you would need to divide the volume in cubic feet by 100. This is because 1 brass is equal to 100 cubic feet. So, the formula would be: Brass = Cubic Feet / 100.
Feet is length, ml is volume - they cannot be compared
To find the volume of a square prism, you multiply the area of the base by the height. The base is a square with each side measuring 10 feet, so the area of the base is (10 \times 10 = 100) square feet. If the height is also 10 feet, the volume would be (100 \times 10 = 1000) cubic feet. Therefore, the volume of the square prism is 1000 cubic feet.
The volume of the swimming pool in cubic feet would be 800 cubic feet: length x width x height = volume 10 feet x 10 feet x 8 feet = 800 cubic feet (10 x 10 = 100; 100 x 8 = 800)
The specific volume of the gas can be calculated by dividing the volume by the weight. In this case, specific volume = 100 cubic feet / 5 pounds = 20 cubic feet per pound.
A box of those dimensions would have a volume of 3 x 2 x 2 or 12 cubic feet. If the length is doubled to 6 feet, the depth is doubled to 4 feet and the height remains the same at 2 feet, the volume would then be: 6 x 4 x 2 or 48 cubic feet. The percent change of the increase would be the difference in the volumes, divided by the original volume, multiplied by 100. In this example, the percent increase is 36/12 times 100 or 300%.
100 cubic feet is a volume, not an area. Consequently the question is misguided.
A 100-foot pipe with a 6-inch diameter has a volume of: 19.63 cubic feet.
It is not recommended to snowmobile in 100 feet of snow as the depth would be too excessive for safe and enjoyable snowmobiling. Typically, snowmobiling is done on trails or open fields with snow depths ranging from a few inches to a few feet. Extremely deep snow can pose significant hazards and challenges for snowmobilers.
The volume you are trying to fill is 120000 cubic feet(100 x 100 x 12)1 cubic foot = 6.22883288 Imperial gallonsSo your pond of 120000 cubic feet would take about 747456 gallons to fill.or1 cubic foot = 28.3168466 litresSo your pond of 120000 cubic feet would take about 3397920 litres to fill.
100 Feet IS 100 Linear Feet. If you wanted to know how many linear feet would give you 100 square feet, you would take the square root of 100, which is 10... SO a 10 x 10 linear foot area would be 100 square feet, and a 100 x 100 Linear foot area would be 10,000 square feet.
All pipe is measured in liner feet. I'm not sure what your asking. 100' of 1" pipe means that you have a 1" pipe that is 100" long. That's liner feet. If your asking about volume of pipe as in how much water will a 4" pipe hold that is 100' long then that's just a simple geometry equation. volume of a cylinder.