oxygen and acetylene
It depends on what welding process is being used and what type of metal is being welded. When Oxy-Fuel Welding, Acetylene is the most popular. MAPP gas and Propane are also used. With the GMAW (MIG) process Argon, CO2 and Oxygen gasses, in mixtures or alone, are used. GTAW (TIG) gasses are almost always Argon and/or Helium. This is not all inclusive as new processes are being developed every day. Check with your welding material supplier for relevant info.
Depends on what you think of as normal welding. Gas welding use oxygen-acetylene. MIG/TIG use Argon. MAG, use an argon-something mix. Depending on what materials you are welding, there are some more options tha might be used.
n - Oxygen and Acetylene are the original gasses that are used for welding/cutting. Newer mixtures are slowly replacing Acetylene as a fuel. These gasses don't always reach the temperatures attained by Acetylene. Us old-timers still prefer Acetylene.
Some common natural gases used for welding include acetylene, propane, and natural gas (methane). Each gas has specific applications and properties that make them suitable for different welding processes. It is important to use the appropriate gas for the specific welding task to ensure optimal results and safety.
I would say that SMAW (stick) is still the most widely used process. The GMAW (mig) process has gained a wide acceptance in construction and fabrication and may even have surpassed stick welding in many situations. Unfortunately with mig welding the machine has to be close to the welding site. Dragging a welding lead into and around fabrications is still much easier than moving a mig machine.
Underwater welding uses a special flux around the welding rod which produces gasses which form a bubble around the end of the rod ,excluding the water. It is difficult and never as strong, lacking penetration. It is only used when absolutly necessary.
It depends on what welding process is being used and what type of metal is being welded. When Oxy-Fuel Welding, Acetylene is the most popular. MAPP gas and Propane are also used. With the GMAW (MIG) process Argon, CO2 and Oxygen gasses, in mixtures or alone, are used. GTAW (TIG) gasses are almost always Argon and/or Helium. This is not all inclusive as new processes are being developed every day. Check with your welding material supplier for relevant info.
Gasses used in welding can include oxygen, acetylene, argon, helium, hydrogen, propane, MAPP gas, and others for special purposes. They may be grouped as oxidizers, fuels and shield gasses.
There are a few commonly used welding process. The top used are shielded metal and arc welding.
On steel a mixture of Argon and CO2 usually 75% to 25%
Depends on what you think of as normal welding. Gas welding use oxygen-acetylene. MIG/TIG use Argon. MAG, use an argon-something mix. Depending on what materials you are welding, there are some more options tha might be used.
TIG welding uses Argon.
filler materials are used to fill the gap between the two job materials during the welding process
Argon, one of the Noble gasses, is used in manufacturing; in welding, lighting products, electronics.
n - Oxygen and Acetylene are the original gasses that are used for welding/cutting. Newer mixtures are slowly replacing Acetylene as a fuel. These gasses don't always reach the temperatures attained by Acetylene. Us old-timers still prefer Acetylene.
Arc. It's where electrical resistance is used to create the heat for the welding process.
A welding cable is used for joining or linking up wires or cable. Welding is the process of joining two things together, and the cable is the connector.