what does it matter? as long as it does it, who cares how? what does it matter? as long as it does it, who cares how?
Candle wax can be difficult to remove, especially from delicate jewelry. To remove candle wax from a wedding ring, soak the ring in a bowl of ice water for 10 minutes. Use fingernails or a wood toothpick to scrape the wax away from the metal. Do not use metal objects such as a knife or wire brush.
Wax itself does not condcut electricity, however the oil's of the wax does conduct electricity. The liquid from the wax will conduct electricity due to Ion conductivity in fluids.
sodium
Yes, its kept in mineral oil to prevent oxidation.
Madam tussauds wax museum london(england).
wax casting is making the original(or other metal) figure.
what does it matter? as long as it does it, who cares how? what does it matter? as long as it does it, who cares how?
Probably means that it has a collinite metal wax (#850) on it.
Sodium metal is usually kept under paraffin because of its high reactivity.
The metal one - it is the best conductor of heat
Lost wax casting. You make something out of wax, jewelry or something similar and attach one or more strips that will act like tubes when the wax is melted out of the mold. You put the piece in a metal container of the right size and pour plaster around it. After the plaster sets, you heat it so that the wax will run out. After this, you melt metal, gold or silver and pour it in the mold or there is a centrifugal caster that forces the molten metal into the mold and gives a better casting. With the mold hot from melting the wax out and the hot metal, you put it in water and the plaster blow off of the piece.
Azulene wax is made from azulene oil which is distilled from the German chamomile flower. Honey wax is a natural wax byproduct from honeybees. It is used to build the cells in which the honey is stored and bee larva are kept until they reach maturation.
The wax which kept together the feathers of the wings his father had made for him.
Sodium is very reactive, it can even react with water or air. So for this reason it is only kept in kerosene
It kept the gun lighter by removing metal
Lost wax casting. You make something out of wax, jewelry or something similar and attach one or more strips that will act like tubes when the wax is melted out of the mold. You put the piece in a metal container of the right size and pour plaster around it. After the plaster sets, you heat it so that the wax will run out. After this, you melt metal, gold or silver and pour it in the mold or there is a centrifugal caster that forces the molten metal into the mold and gives a better casting. With the mold hot from melting the wax out and the hot metal, you put it in water and the plaster blow off of the piece.