Voltage is not stoichiometric, so increasing the number of moles of a substance will not affect its voltage.
A voltaic cell has metal in it, so the types of metals can increase or decrease the voltage. The surface area of the metals in the acid (which must be used to generate electricity) can also increase or decrease the voltage. This is very basic, but I hope it helps.
if the external circuit is replaced by a source of electricity that opposes the voltaic cell, the electrode reactions can be reversed.Now,the external source pushes the electrons in the opposite direction and supplies energy or work to the cell so that the reverse non-spontaneous reaction occurs.
A Galvanic cell, or Voltaic cell, named after Luigi Galvani, or Alessandro Volta respectively.In 1780, Luigi Galvani discovered the Galvanic cell.The volatic pile invented by Alessandro Volta in the 1800s is similar to the galvanic cell.
In a voltaic cell, the anode is the negative electrode.
The other name of voltaic cell is galvanic cell
what determines the amount of voltage produced by a voltaic cell?
A voltaic cell has metal in it, so the types of metals can increase or decrease the voltage. The surface area of the metals in the acid (which must be used to generate electricity) can also increase or decrease the voltage. This is very basic, but I hope it helps.
voltage
A voltaic cell can produce electricity. Please see the link.
To produce a voltage.To produce a voltage.To produce a voltage.To produce a voltage.
Alessandro Volta increased the current produced by his battery by connecting multiple voltaic cells in series. This increased the voltage output, which in turn increased the current. By adding more voltaic cells, he was able to boost the overall current output of the battery.
It's a part that reacts by putting out a voltage when a light is shining on it.
temperature sensorAnswerA thermo-voltaic junction, or thermo-voltaic pile, is used for this purpose. A thermo-voltaic junction consists of two dissimilar metals connected together; as the temperature increases, an increasing potential difference arises between the two metals. A thermo-voltaic 'pile' is a number of thermo-voltaic 'junctions' connected in series.
You might mean a voltaic cell, an early form of battery cell. Please see the link.
It is not based on the area really... basically for each photo voltaic cell they have a certain voltage, if you connect them in series such as -------0-------0----------0---------0--- then it will increase the voltage 4fold but not the amplitude if they are connected in parallel then amplitude will increase but not voltage. Usually panels have a mix of both to get a good voltage and amplitude |--------0-----| |--------0-----| |-------0------| |------0-------| |------0-------|
photo voltaic cell ************************ A dynamo is a generator which produces d.c.
In battery technology, Float voltage is the constant voltage that is applied continuously to a voltaic cell under float operation. The voltage could be held constant for the entire duration of the cell's operation (such as in the SLI battery) or could be held for a particular phase of charging by the charger.