0
What else can I help you with?
How do you lower alkalinity and raise pH?
To lower the alkalinity in a pool you can use PH Minus or Muriatic acid. When adding pour into one spot in the deep end of the pool away from circulation, make sure the circulation system is running. Do not apply near metal fittings or near the pool skimmer. Also make sure you follow directions when using the product.ANS2Can't be done. It is like slowing down while you run faster. Lowering the alkalinity is the same as decreasing the pH. The less alkaline the water, the lower the pH.
Does Ammonia have a PH level between 5 and 8?
No. One molar ammonia has a pH of around 11.
What alkaline is in fertilizer?
One common alkaline compound found in fertilizers is calcium carbonate, which helps to raise soil pH levels. This compound can neutralize acidic soils and provide essential calcium for plant growth. It can be found in various forms such as limestone or dolomite.
How much borax to raise alklinity?
In the words of the song, where you are usually depends on where you start. In your case, that means that without knowing the size of your pool and how acidic is is to start with, no one can tell you how much to add to bring it up.
Is cement acidic or alkaline?
Cement is alkaline. However, when mixed with steel (reinforcing bars)(Iron) , which is acidic. they neutralise one another, and so are resistant to weathering.
Alphabetically What are the first and last of the alkaline earth metals?
Alphabetically, the first alkaline earth metal is barium and the last is strontium.
Can you raise an in-ground swimming pool from 8 to 5 feet?
Yes you can but it is quite complicated. First you take a shovel, then you start digging. That should do it. Oh, don't forget to drain the pool before you start diggin, it could get a little muddy. Have fun, Marcy
What was westlife's first number one in Ireland?
you raise me up
Are acidic and alkaline both alkaline?
No, an acid is an acid and an alkaline is alkaline. They are essentially opposites and will react with one another. The product depends on the specific reactants
BTU's needed to raise temp of water by 1 degree?
Calculating Necessary Pool Heater Output Formula... Pool Gallons X 8.33 X Desired Temp. Increase / 24 Hrs. =Heater BTU'S Per Hour Required To Heat Up The Pool Example: 30,000 gallon pool @ 55 degrees, heated to 75 degrees 30,000 x 8.33 x 20 = 4,998,000 BTU'S / 24 hours = 208,250 Output BTU'S per hour The example above shows that 20' x 40' pool with an average depth of 5 feet with a heater producing an output of approx. 210,000 BTU's would require 24 hours to raise the temperature of the pool 20 degrees.
How do you lower alkalinity and raise pH?
To lower the alkalinity in a pool you can use PH Minus or Muriatic acid. When adding pour into one spot in the deep end of the pool away from circulation, make sure the circulation system is running. Do not apply near metal fittings or near the pool skimmer. Also make sure you follow directions when using the product.ANS2Can't be done. It is like slowing down while you run faster. Lowering the alkalinity is the same as decreasing the pH. The less alkaline the water, the lower the pH.
Do you rake the sides of the pool or vacuum in ground pool first?
Assuming by "rake" one means skimming the leaves and other debris that floats on the water surface, yes, that should be done first. Some may settle to the bottom during the skimming process. Clean a pool as you would your house ... one dusts first, then vacuum's.
Can you add sodium bicarbonate to your water system to raise the pH?
Yes, but I was informed not to add more than 2 pounds of baking soda (sodium bicarbonate) at one time. I tried this and it does raise the pH of your swimming pool.
How long will it take to raise a pool temperature by 10 degrees with a 250000 BTU propane heater and 30000 gallons of water?
probably more than one second
How can I efficiently heat a swimming pool to ensure comfortable temperatures for swimming?
One efficient way to heat a swimming pool and maintain comfortable temperatures for swimming is to use a pool heater. Pool heaters can be powered by electricity, gas, or solar energy, and can quickly raise the water temperature to a desired level. Additionally, using a pool cover when the pool is not in use can help retain heat and prevent heat loss, further ensuring comfortable swimming temperatures.
Can baking soda raise the cyanuric acid level in a pool?
No, sodium bicarb is used to increase alkalinity. Cyanuric acid is used as a stabalizer. One is base the other acidic.
What are some methods reformers used to bring changes in society?
first one raise in peole.
