0
Nitric acid (HNO3), also known as aqua fortis and spirit of nitre, is a highly corrosive and toxic strong mineral acid which is normally colorless but tends to acquire a yellow cast due to the accumulation of oxides of nitrogen if long-stored. Ordinary nitric acid has a concentration of 68%. When the solution contains more than 86% of it, it is referred to as fuming nitric acid. Depending on the amount of nitrogen dioxide present, fuming nitric acid is further characterized as white fuming nitric acid or red fuming nitric acid, at concentrations above 95%. Nitric acid is also commonly used as a strong oxidizing agent.
What else can I help you with?
Which piece of apparatus is used to add dilute nitric acid to potassium hydroxide?
A burette is typically used to add dilute nitric acid to potassium hydroxide in a controlled and precise manner for titration experiments.
The name of HNO3 is?
HNO3 is Nitric Acid Compare with HNO2 ; Nitrous Acid. Note the difference in the formulas and the names. Accounted for by the different oxidation states of nitrogen .
How do you dissolve lead oxide?
To dissolve lead oxide, you can use dilute nitric acid. Add the nitric acid to the lead oxide and heat the mixture gently until the lead oxide dissolves. Be sure to handle nitric acid with care as it is a corrosive substance.
Can nitric acid be diluted with water?
Yes, nitric acid can be diluted with water to reduce its concentration and acidity. It is important to add the acid to water slowly while stirring to prevent splashing or releasing heat. Always follow proper safety precautions when handling and diluting nitric acid.
How do you raise the pH of nitric acid?
To raise the pH of nitric acid, you can add a base such as sodium hydroxide (NaOH) or potassium hydroxide (KOH) in small increments while monitoring the pH. The reaction will neutralize the acid and increase the pH level. Remember to add the base slowly and carefully to avoid any sudden increase in pH.
What 2 chemicals are made when you add lead to nitric acid?
hoh
Which piece of apparatus is used to add dilute nitric acid to potassium hydroxide?
A burette is typically used to add dilute nitric acid to potassium hydroxide in a controlled and precise manner for titration experiments.
The name of HNO3 is?
HNO3 is Nitric Acid Compare with HNO2 ; Nitrous Acid. Note the difference in the formulas and the names. Accounted for by the different oxidation states of nitrogen .
Nitric acid reacts with nitric acid?
No, it does not
How do you dissolve lead oxide?
To dissolve lead oxide, you can use dilute nitric acid. Add the nitric acid to the lead oxide and heat the mixture gently until the lead oxide dissolves. Be sure to handle nitric acid with care as it is a corrosive substance.
Can nitric acid be diluted with water?
Yes, nitric acid can be diluted with water to reduce its concentration and acidity. It is important to add the acid to water slowly while stirring to prevent splashing or releasing heat. Always follow proper safety precautions when handling and diluting nitric acid.
Is nitric acid a heterogeneous?
nitric acid is heterogeneous.
How do you raise the pH of nitric acid?
To raise the pH of nitric acid, you can add a base such as sodium hydroxide (NaOH) or potassium hydroxide (KOH) in small increments while monitoring the pH. The reaction will neutralize the acid and increase the pH level. Remember to add the base slowly and carefully to avoid any sudden increase in pH.
What is the periodic name for nitric acid?
The IUPAC name for nitric acid is "nitric acid." But its Periodic name is HNO3
How many molecules of nitric acid are in 300 g of nitric acid?
The number of nitric acid molecules is 28,6723.10e23.
What do you get when you add iron filings to nitric acid?
When you add iron filings to nitric acid, you will observe a chemical reaction where the iron reacts with the nitric acid to produce iron nitrate and release nitrogen dioxide gas. It's a redox reaction in which the iron is oxidized and the nitric acid is reduced.
What does nitric acid lead to?
Nitric acid lead to nitrates.
