because sodium metal immediately react with water and causes explosion thats why we use distilled water in preparing sodium extract
by asghar tariq nohri
No, using a strong solution of NaOH to make sodium extract is not practical due to the high reactivity of sodium with water. Sodium metal is typically produced through electrolysis of molten sodium chloride (NaCl) or other methods that involve isolation of the pure metal.
To prepare 0.02M sodium thiosulfate solution, weigh out the required amount of sodium thiosulfate pentahydrate (Na2S2O3·5H2O) or anhydrous sodium thiosulfate (Na2S2O3). Dissolve this in distilled water and make up the volume to the desired concentration. Make sure to use a volumetric flask for accuracy and precision in preparing the solution.
To prepare a 0.1 N solution of sodium carbonate in 1 liter, dissolve 5.3 grams of anhydrous sodium carbonate (Na2CO3) in distilled water and make up the volume to 1 liter with water. Stir well until the sodium carbonate is completely dissolved. This will give you a 0.1 N solution of sodium carbonate in 1 liter.
To prepare 0.01N sodium thiosulfate per Indian Pharmacopoeia (IP) standards, dissolve 25.3 grams of pure sodium thiosulfate pentahydrate (Na2S2O3·5H2O) in distilled water to make 1000 ml of solution. This solution will have a normality of 0.01N.
To prepare a 0.002M sodium thiosulfate solution, dissolve the appropriate amount of sodium thiosulfate pentahydrate (Na2S2O3·5H2O) in distilled water to make the desired volume of solution. Calculate the molarity using the formula M = (mol/L) and adjust as needed. Make sure to accurately measure and mix the components to ensure a homogeneous solution.
Chocolate extract is very like vanilla extract in its make-up that is, the essence of the bean distilled in a solution of water and alcohol.
This affirmation is not correct.
Soda extract for any salt means taking the salt and Sodium Carbonate together in the ratio of 1:4(like one spoonful of salt + 4 spoonful of Na2CO3) and then making their solution in distilled water by completely dissolving them. The resulting solution is your soda extract.
Dissolve 0,9 g sodium chloride in 100 mL distilled water.
No, using a strong solution of NaOH to make sodium extract is not practical due to the high reactivity of sodium with water. Sodium metal is typically produced through electrolysis of molten sodium chloride (NaCl) or other methods that involve isolation of the pure metal.
Yes, you can make your own glutathione soap but it is very complicated. You will need titanium dioxide, sodium silicate, anti-bacterial liquid, moisturizer, distilled water, and apple extract. You will also need a fragrance, glutathione capsules, coconut oil, evaporated milk, and lye solution.
To prepare a 3M sodium acetate (NaOAc) solution, first calculate the amount of sodium acetate needed. For 1 liter of a 3M solution, dissolve 204.22 grams of sodium acetate trihydrate (NaOAc·3H2O) in distilled water. Stir the mixture until the sodium acetate is fully dissolved, then make up the volume to 1 liter with more distilled water. Always ensure to label the solution and store it appropriately.
To make distilled water at home, you can boil water in a pot and collect the steam in a clean container. As the steam cools, it will condense back into pure distilled water.
To make distilled water at home, you can boil water in a pot and collect the steam in a clean container. As the steam cools, it will condense back into pure distilled water.
Yes, you can make distilled water at home by boiling water and collecting the steam that condenses back into liquid form.
Distilled water doesn't have anything to do with charges. To make distilled water, you, well, distill water. That is, you heat it until it boils, then collect and condense the vapor.
i will make battery distilled water