plugs use copper because copper is a conducter of electricity
It is not recommended to use muriatic acid to clean copper, as it can cause damage to the copper surface and potentially lead to discoloration. It is safer to use a specific copper cleaner or a mixture of vinegar and salt to clean copper surfaces effectively.
Copper carbonate or copper hydroxide can be used as alternatives to copper oxide in preparing copper sulfate. These compounds can react with sulfuric acid to produce copper sulfate in a similar manner to copper oxide.
It is not recommended to use an iron spatula to stir a solution of copper sulfate as the iron can react with the copper sulfate solution and potentially contaminate or alter the solution. It is best to use a glass or plastic spatula for stirring solutions containing copper sulfate.
If you needed to use powered copper 2 sulfate in an experiment and were only supplied with clumps of copper 2 sulfate which tool would you need to convert the copper sulfate to usable form?
Sulfuric Acid. The chemical reaction is Cu + 2H2SO4 = CuSO4 + SO2 + 2H2O
ac delco copper Use the factory recommended plugs. AC delco 41906.
Spark plugs use several materials, including steel, copper, platinum, porcelain, and a mineral called kyanite.
Type your answer here... NGK BCPR6ES, copper core.
Copper is used because it is a good conductor. The pins are generally made of brass, an alloy of copper, as it is harder. Fuse clips are often made of copper. Also: Copper is desirable in electric circuits because it's the second-best conducting metal. The reason we don't use the first-best is on account of cost. The first-best is silver.
rique orozco
If using standard copper core spark plugs, every 30,000 miles. If using platinum plugs, up to every 100,000.
chromium copper iridium platinum
OEM is normally best. So, if it came with Copper, use copper plugs, and if it came with platinum, use platinum. Changing brands to cheaper plugs often causes drivability issues. Regardless of what plug you buy, make sure you gap them correctly using a gapping tool and the correct specification. This can be found on the emission sticker under the hood or often in the owner's manual. Remember, hemi has 16 spark plugs, 2 per cylinder!
Always use what your owners manual says. They know what's best. Unless you heavily modified your car, but even then I wouldent go with copper.
For a 2000 Volvo S40, it is recommended to use copper core spark plugs, specifically NGK BPR6ES or equivalent. These plugs provide optimal performance for the vehicle's engine, ensuring efficient combustion and reliable starts. It's important to check the owner's manual for any specific requirements or recommendations based on the engine variant. Always replace spark plugs in sets to maintain balance in engine performance.
It depends on what it is.. as far as copper you're not gonna find any clean copper for scrapping(which is why I'm assuming you're asking) you will find copper with a bit of work, you will have lost of wiring depending on the car and then in the electrical components other than that there's no copper anywhere else, only in the wiring and alternator and starter. some cars have copper radiator(older stuff) but most are alum.. or maybe brass.. you may also find a little bit of copper in the spark plugs if its older(newer plugs are platinum)
Petrol/gasoline cars do use spark plugs.Petrol/gasoline cars do use spark plugs.