answersLogoWhite

0

Blank titration is carried out in argentometric titration to account for any impurities or contaminants present in the reagents used. By measuring the volume of titrant required to reach the endpoint in the blank titration, this value can be subtracted from the volume used in the actual titration to determine the accurate amount of titrant required to react with the analyte.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Chemistry

What is Fajan's method of argentometric titration?

Fajan's method of argentometric titration involves the use of potassium chromate as an indicator to detect the end point of a titration between silver ions and chloride ions. The indicator changes color from yellow to red when all the chloride ions have reacted with the silver ions, marking the end point of the titration.


Why pottasium chromate is used as indicator in argentometric titration?

Potassium chromate is used as an indicator in argentometric titrations because it forms a red precipitate (silver chromate) in the presence of excess silver ions. This color change signals the end point of the titration, where all the chloride ions have reacted with silver ions. This makes it easy to visually detect when the reaction is complete.


Why is it necessary to establish a blank titration before the reaction?

Establishing a blank titration allows you to account for any impurities or contaminants in the titration procedure or equipment, which could affect the accuracy of your results. By performing a blank titration, you can isolate the contribution of these factors and subtract them from your subsequent titration measurements to ensure the accuracy of your results.


Why silver nitrate is used in argentometric titration?

Silver nitrate is used in argentometric titrations because it forms insoluble silver chloride, silver bromide, or silver iodide precipitates with halide ions present in the solution. The endpoint of the titration is reached when all the halide ions have reacted with silver ions, forming a visible precipitate. This allows for precise determination of the halide ion concentration in the sample.


Why is Volume of HCl used for blank titration is more than volume of HCl used for oil titration?

The blank titration is used to determine the exact amount of acid needed to neutralize any impurities in the titration setup, such as the indicator and solvent. This additional volume of acid is accounted for in the blank titration and is subtracted from the volume of acid used in the titration with the oil sample.

Related Questions

What is Fajan's method of argentometric titration?

Fajan's method of argentometric titration involves the use of potassium chromate as an indicator to detect the end point of a titration between silver ions and chloride ions. The indicator changes color from yellow to red when all the chloride ions have reacted with the silver ions, marking the end point of the titration.


Why pottasium chromate is used as indicator in argentometric titration?

Potassium chromate is used as an indicator in argentometric titrations because it forms a red precipitate (silver chromate) in the presence of excess silver ions. This color change signals the end point of the titration, where all the chloride ions have reacted with silver ions. This makes it easy to visually detect when the reaction is complete.


Can a blank titration reading be greater than sample titration?

yes.


Why is it necessary to establish a blank titration before the reaction?

Establishing a blank titration allows you to account for any impurities or contaminants in the titration procedure or equipment, which could affect the accuracy of your results. By performing a blank titration, you can isolate the contribution of these factors and subtract them from your subsequent titration measurements to ensure the accuracy of your results.


Why silver nitrate is used in argentometric titration?

Silver nitrate is used in argentometric titrations because it forms insoluble silver chloride, silver bromide, or silver iodide precipitates with halide ions present in the solution. The endpoint of the titration is reached when all the halide ions have reacted with silver ions, forming a visible precipitate. This allows for precise determination of the halide ion concentration in the sample.


Why is Volume of HCl used for blank titration is more than volume of HCl used for oil titration?

The blank titration is used to determine the exact amount of acid needed to neutralize any impurities in the titration setup, such as the indicator and solvent. This additional volume of acid is accounted for in the blank titration and is subtracted from the volume of acid used in the titration with the oil sample.


Why does blank titration shows the higher value compared to sample titration in iodine value?

In blank titration, no sample is present to react with the iodine solution, leading to an apparent excess of iodine. This can result in a higher value as all the iodine being counted towards the blank. In sample titration, the sample reacts with the iodine, leading to a lower amount of iodine available to react, resulting in a lower value compared to the blank titration.


Why argentometric titrection called direct tiretion?

Argentometric titration is often referred to as direct titration because it involves the direct addition of a silver nitrate solution to a sample containing chloride ions until the endpoint is reached. The endpoint is typically indicated by a color change due to the formation of a precipitate, such as silver chloride. In this method, the reactants are mixed continuously until the reaction is complete, allowing for the direct determination of the analyte concentration.


What is the role of blank in formol titration?

In formol titration, blank serves as a control to account for any background color or turbidity in the sample that could interfere with the endpoint detection. By subtracting the blank value from the sample titration values, a more accurate measurement of the analyte concentration can be obtained.


What is the importance of blank titration?

Blank titration is important because it helps to account for any impurities in the reagents or solvents used in a titration experiment. By subtracting the blank titration values from the experimental titration values, more accurate results can be obtained. It ensures that the measured values are reflective of the actual reaction occurring between the analyte and titrant.


I.Explain why it is necessary to do a blank titration during Mohr titration?

A blank titration is necessary during a Mohr titration to account for any potential interference or background color changes that may occur in the titration process. It helps establish a baseline by determining the volume of titrant required to reach the endpoint in the absence of the analyte. This ensures that the results obtained from the actual titration accurately reflect the concentration of the analyte being measured, without the influence of extraneous factors. By subtracting the blank titration volume from the total volume used in the actual titration, the final results are more reliable and precise.


Need of blank titration?

Blank titration is typically used in analytical chemistry to account for any impurities or chemical interference in the titration process. It involves running the titration without the sample to measure any background signal or end point shift caused by impurities, which is then subtracted from the titration with the sample to obtain accurate results. This method helps in ensuring the precision and accuracy of the titration analysis.