0
Why does adding distilled water in the conical flask during titration not affect the titration result?
Adding distilled water in the conical flask during titration does not affect the titration result because the volume of the solution in the conical flask affects the concentration of the titrant solution. As long as the same volume of titrant is delivered from the burette and reacts with the analyte, the concentration of the titrant and the volume of the analyte solution will remain the same, ensuring accurate results.
What else can I help you with?
Why must you rinse the titration flask with distilled water before further use?
Rinsing the titration flask with distilled water helps to remove any residue or impurities from the previous titration, which could affect the accuracy of the next titration. It ensures that the flask is clean and free of any substances that could interfere with the reaction being studied. This step is crucial for obtaining precise and reliable titration results.
Why is distilled water used during titration?
distilled water is used (as opposed to tap water) as it does not contain ions or impurities that may affect the results of the titration, usually by reacting with the acid/alkali themselves or by changing the pH of the solution.As water is pH 7, it is neutral and will not change the pH.
What is the purpose rinsing the burette with distilled water during titration?
Rinsing the burette with distilled water helps to remove any impurities or residue that may be present inside the burette. This ensures that there are no contaminants that could affect the accuracy of the titration results.
Why you have to add buffer before titration with EDTA?
Adding a buffer solution before titration with EDTA helps to maintain a constant pH which is crucial for the formation of metal-EDTA complexes. The buffer solution prevents any fluctuations in pH that could affect the accuracy and precision of the titration results.
Why is it necessary to rinse the conical flask with distilled water for titration?
It is necessary due to the conical flask may not be clean. deionised water is necessary as opposed to water due to the fact that alot of titrations if not all involve ions. if extra ions are added from the water the equivilance point could be off by a few tenths of a ml. Rinsing in general is necessary due to the fact that you never know what was held in the flask beforehand, and in nearly all cases it would upset your results. although, if you have no deionised water, it would upset your results less if you cleaned glasswear with normal water than if you used dirty glasswear. I recently won a competition that was part titrimetric, so I'm confident in my technique as thought by my lab technician. quick wash with tap water twice, then quick rinse with deionised twice. if anything impure remains, it will be so dilute that it shouldn't affect results.
Why is the conical flask only rinsed with distilled water in the titration procedure?
Yes. By adding water to rinse, you will be changing the concentration of the thing you are titrating, and so your calculation will be off. If you have material on the walls of the flask, just gently stir the flask and let the solution in the flask wash anything off the walls. I do not believe this is true. Once you add an amount of reactant into your flask adding more water will not change the number of moles of reactant that are present in the flask. The titrant will react in the mole ratio for that particular reaction so water doesn't play a role. You can rinse the flask and even use water to get part of a drop into your flask for a more accurate titration.
Why must you rinse the titration flask with distilled water before further use?
Rinsing the titration flask with distilled water helps to remove any residue or impurities from the previous titration, which could affect the accuracy of the next titration. It ensures that the flask is clean and free of any substances that could interfere with the reaction being studied. This step is crucial for obtaining precise and reliable titration results.
What happen if you adding water to the titrated substance in the conical flask during the process of titration?
NoUser 1Yes. By adding water to rinse, you will be changing the concentration of the thing you are titrating, and so your calculation will be off. If you have material on the walls of the flask, just gently stir the flask and let the solution in the flask wash anything off the walls.User 2I do not believe this is true. Once you add an amount of reactant into your flask adding more water will not change the number of moles of reactant that are present in the flask. The titrant will react in the mole ratio for that particular reaction so water doesn't play a role. You can rinse the flask and even use water to get part of a drop into your flask for a more accurate titration.User 3No. User 1 means to say that water in the volumetric burette or pipette will effect the concentration of titrant moles. Water in a conical flask will not effect the titre values because the same mole ratios are reacting, and your titre value is measured from the volume remaining in the volumetric burette and not the conical flask. User 2 is correct, although using water to rinse the volumetric burette's contents into the conical flask would adversely effect the results, as volumetric burettes and pipettes are designed to account for the few remaining drops in the instruments. Shaking or tapping the instruments is also a bad idea, as they can easily be broken and doing this would effect your titre values anyway.User 4It will not affect the result at all as long as you use distilled water, as just tap water obviously contains other minerals etc that will affect the results.
Why is distilled water used during titration?
distilled water is used (as opposed to tap water) as it does not contain ions or impurities that may affect the results of the titration, usually by reacting with the acid/alkali themselves or by changing the pH of the solution.As water is pH 7, it is neutral and will not change the pH.
What is the purpose rinsing the burette with distilled water during titration?
Rinsing the burette with distilled water helps to remove any impurities or residue that may be present inside the burette. This ensures that there are no contaminants that could affect the accuracy of the titration results.
Why you have to add buffer before titration with EDTA?
Adding a buffer solution before titration with EDTA helps to maintain a constant pH which is crucial for the formation of metal-EDTA complexes. The buffer solution prevents any fluctuations in pH that could affect the accuracy and precision of the titration results.
Why doesn't adding water to a vinegar sample prior to titration affect the calculated molarity?
That is a question that confuses many. It is because the water is not acidic and therefore does not affect a colour change. You have a known volume of vinegar when starting the experiment.
Why is it necessary to rinse the conical flask with distilled water for titration?
It is necessary due to the conical flask may not be clean. deionised water is necessary as opposed to water due to the fact that alot of titrations if not all involve ions. if extra ions are added from the water the equivilance point could be off by a few tenths of a ml. Rinsing in general is necessary due to the fact that you never know what was held in the flask beforehand, and in nearly all cases it would upset your results. although, if you have no deionised water, it would upset your results less if you cleaned glasswear with normal water than if you used dirty glasswear. I recently won a competition that was part titrimetric, so I'm confident in my technique as thought by my lab technician. quick wash with tap water twice, then quick rinse with deionised twice. if anything impure remains, it will be so dilute that it shouldn't affect results.
How does water affect titration?
Water can affect titration by diluting the analyte, potentially leading to inaccurate results. It can also impact the pH of the solution being titrated, affecting the equivalence point and the shape of the titration curve. It is important to take into consideration the amount of water present to ensure accurate and precise titration results.
Why the titration have to be carried out immediately after the addition of sulphuric acid?
Titration should be carried out immediately after the addition of sulfuric acid to prevent any chemical reactions or changes in the sample that could affect the accuracy of the titration results. Waiting could lead to altered concentration levels or other undesired reactions that could affect the titration process.
Why is it necessary to establish a blank titration before the reaction?
Establishing a blank titration allows you to account for any impurities or contaminants in the titration procedure or equipment, which could affect the accuracy of your results. By performing a blank titration, you can isolate the contribution of these factors and subtract them from your subsequent titration measurements to ensure the accuracy of your results.
Would it matter if droplets of distilled water were left in the buret when it was fill with sodium hydroxide?
Yes, as it will serve to dilute the concentration of the sodium hydroxide being placed in the buret. You will being adding a known concentration of sodium hydroxide and ending up with an unknown concentration.
