answersLogoWhite

0

4-nitroaniline, an organic compound, is being titrated with sulphuric acid in the mixture to help solubilize the compound. This aids in the reaction and allows for accurate titration results to be obtained.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Chemistry

Which solution in the titration is taken in conical flask?

The solution being titrated is placed in the conical flask. The titrant (the solution being added during titration) is then slowly added to the solution in the conical flask until the endpoint is reached.


Is there any difference between conical flask and titration lask?

Yes, there is a difference between a conical flask and a titration flask. A conical flask is a general-purpose laboratory glassware used for mixing and heating liquids, while a titration flask, also known as a burette, is a specific type of flask used in a titration to measure the volume of a substance being added to a solution. Titration flasks are usually marked with volume measurements to accurately determine the amount of substance added in a titration.


What is the titration flask?

A titration flask is a glass vessel with a narrow neck and a flat bottom used in titration experiments. It typically has volume markings for precise measurement of liquids added or titrated during the experiment.


Why you rinse titration flask with water?

Rinsing the titration flask with water is done to ensure that all of the titrant (the solution being titrated) is transferred into the flask for accurate measurements. By rinsing, you can be sure that no titrant is left behind on the walls of the flask, ensuring a complete reaction during the titration process.


Why is the indicator not added to the titration flask at the begging of the iodomettic titration?

Adding the indicator at the beginning of the iodometric titration can react with the iodine present, which can lead to errors in the titration results. By adding the indicator after most of the iodine has reacted, it ensures that the endpoint is more accurate and reliable.

Related Questions

Which solution in the titration is taken in conical flask?

The solution being titrated is placed in the conical flask. The titrant (the solution being added during titration) is then slowly added to the solution in the conical flask until the endpoint is reached.


Is there any difference between conical flask and titration lask?

Yes, there is a difference between a conical flask and a titration flask. A conical flask is a general-purpose laboratory glassware used for mixing and heating liquids, while a titration flask, also known as a burette, is a specific type of flask used in a titration to measure the volume of a substance being added to a solution. Titration flasks are usually marked with volume measurements to accurately determine the amount of substance added in a titration.


What is the titration flask?

A titration flask is a glass vessel with a narrow neck and a flat bottom used in titration experiments. It typically has volume markings for precise measurement of liquids added or titrated during the experiment.


Why you rinse titration flask with water?

Rinsing the titration flask with water is done to ensure that all of the titrant (the solution being titrated) is transferred into the flask for accurate measurements. By rinsing, you can be sure that no titrant is left behind on the walls of the flask, ensuring a complete reaction during the titration process.


When are drops of indicator most likely added to the Erlenmeyer flask?

Drops of indicator are most likely added to the Erlenmeyer flask just before the titration begins, after the titrant has been prepared and the analyte solution is in the flask. This ensures that the indicator can effectively signal the endpoint of the titration process by changing color in response to the pH change as the titrant is added. Adding the indicator too early may lead to degradation or interference before the actual titration occurs.


Why is the indicator not added to the titration flask at the begging of the iodomettic titration?

Adding the indicator at the beginning of the iodometric titration can react with the iodine present, which can lead to errors in the titration results. By adding the indicator after most of the iodine has reacted, it ensures that the endpoint is more accurate and reliable.


What happens to a pH of a solutionin a conical flask during a titration?

During a titration, the pH of the solution in the conical flask typically changes as the titrant is added. The pH may increase, decrease, or remain constant depending on the nature of the reactants and products formed during the titration. The pH may reach a maximum or minimum at the equivalence point, depending on the type of titration being conducted.


Do you use titrant in conical flask?

yes we use titrant in the conical flask ,this is because titrant is a solution we use in burrete for titration in this process we titrant the solution in the conical flask along with an indicator


Why does it not matter if conical flask you wet with water during titration?

Wetting the conical flask with water during titration helps to ensure thorough mixing and prevents solution splashing or clumping on the sides of the flask. This can help in obtaining accurate and consistent titration results.


What is titration flask used for?

A titration flask is used in the laboratory to hold and contain the solution being titrated. It typically has a narrow neck and a stopcock at the bottom to control the release of the titrant into the reaction mixture during the titration process.


Why must you rinse the titration flask with distilled water before further use?

Rinsing the titration flask with distilled water helps to remove any residue or impurities from the previous titration, which could affect the accuracy of the next titration. It ensures that the flask is clean and free of any substances that could interfere with the reaction being studied. This step is crucial for obtaining precise and reliable titration results.


Why the titration flask need to be shake during titration?

Shaking the titration flask during titration helps to ensure that the reaction mixture is well-mixed and that the titrant is evenly distributed throughout the solution. This promotes a more uniform reaction and more accurate measurement of the endpoint of the titration.