The refractive index is a physical property of the medium that depends on the wavelength of the light, and the temperature. The temperature needs to be specified, and is usually 20 or 25 degree Celsius. The refractive index decreases with increasing temperature, and for most organic compounds one can correct for the temperature.
Typically increasing the temperature of a medium reduces its density (e.g. by increasing the kinetic energy of each constituent particle). As the refractive index is dependent upon materialistic density, it is thus a function of temperature.
Specific heat is the heat required to raise the temperature of a unit mass by one degree. It is measured by joules.
the temperature of the water and the solubility of baking soda at that temperature
Temperature is the correct answer because temperature measures average kinetic energy.
Using the Celsius temperature scale, it is not correct. But doubling the temperature using the Kelvin temperature scale, where zero is the absolute minimum gegree possible, will double pressure . p1/T1=p2/T2=constant.
Yes most things can be a gas as long as there at the correct temperature so carbon could be a gas
Temperature is the correct spelling.The correct spelling is temperature (measured heat energy of an object or system).m,you mean temperature?
The correct spelling is "temperature" (measured heat level).
The correct answer doesn't appear in the list of choices.Each of those three quantities CAN be describes in SI units.
The correct temperature is dependent on what you are cooking, not what you are using to cook it!
The correct fluid level is determined with the use of the dealers scan tool and the dipstick ( which is a special tool ). The scan tool is required to know internal trans temperature, That is compared to a chart and the correct fluid height can then be measured.
by using the prism spectrometer,we can easily find the refractive index of the material.
That would be correct,
That is the correct spelling of "advise" (to counsel or suggest).The noun form is advice.
The answer is yes because centiMeters is not correct
The fluid level is very temperature specific. A scan tool is required to know the exact temperature of the fluid. The fluid level is then measured with a special tool ( at the dealer ) and that reading is compared to a chart in the service manual to fins the correct level. From a temperature of 30 deg F to 200 deg F the level can change 3 to 4 inches.The fluid level is very temperature specific. A scan tool is required to know the exact temperature of the fluid. The fluid level is then measured with a special tool ( at the dealer ) and that reading is compared to a chart in the service manual to fins the correct level. From a temperature of 30 deg F to 200 deg F the level can change 3 to 4 inches.
The wavefront surgery corrects eye vision. It is used to correct refractive errors near sightedness, far sightedness and astigmatism. It is used to give people better eye sight.
Both so the correct temperature on the thermometer can relate to the correct room temperature.