0
This method works through the principle of distillation, which takes advantage of the difference in boiling points between acetone and water. Acetone has a lower boiling point than water, so when the mixture is heated, acetone vaporizes first and is collected, leaving water behind. This process effectively separates the two components based on their different physical properties.
What else can I help you with?
Is acetone thicker than water?
No, acetone is about the same viscosity as water.
How do you separate water alcohol and acetone?
To separate water, alcohol, and acetone, you can use fractional distillation. First, heat the mixture to vaporize the acetone, which has the lowest boiling point. Then cool and condense the acetone vapor, which can be collected separately. Next, heat the remaining liquid to vaporize the alcohol, which has a higher boiling point than acetone but lower than water. Finally, separate water from the mixture by distilling the remaining liquid, as water has the highest boiling point of the three compounds.
What weighs more water or acetone?
Water weighs more than acetone. This is because water has a higher density than acetone, meaning that a given volume of water will have a greater mass compared to the same volume of acetone.
Can we separate oil and water by a fractional distillation?
No, fractional distillation is not effective in separating oil and water because they have very different boiling points. Oil has a higher boiling point than water, so they would not separate in a fractional distillation process. Instead, a process such as gravity separation or using a separating funnel would be more effective in separating oil and water.
What method is best for separating sea water?
The most common method for separating seawater is through a process called desalination. This can be done using either thermal methods (such as distillation) or membrane methods (such as reverse osmosis) to remove the salt and impurities, leaving behind fresh water.
What is a suitable method for separating salt from seawater?
Allow the water to evaporate, leaving behind the salt would be effective for separating salt and water in a mixture.
What is the method for separating dust and water?
what separeting method of chulk dust and water
What is the method use in separating oil and water?
The simplest method is decantation.
A good method for separating dust from water?
chemistry
What is the method use in separating stones from water?
pick them out
Do you use filtration in separating oil from water?
Yes, filtration is not an effective method for separating oil from water because oil molecules are much smaller than the pores in a filter. Instead, methods like centrifugation or skimming can be used to separate oil from water more effectively.
Methods on separating oil and water?
A simple method is decantation.
How do you separating water and salt?
You can simply separate salt and water by distillation method.
What method is best for separating pure water from a sea water solution?
distillation
What is a good method for separating dust from water?
One effective method is using a filter such as a cloth or coffee filter to trap the dust particles as the water is poured through. Alternatively, allowing the dust to settle at the bottom of the water container and then carefully pouring off the clean water can also work.
What method of separating mixture can be used to separate water and oil?
the answer is extraction. represent
Is acetone thicker than water?
No, acetone is about the same viscosity as water.
