Sulfur is not used in making pipes because it is a brittle element at room temperature and can degrade when exposed to moisture, leading to leaks or breakages in pipes. Instead, materials like plastic, copper, or stainless steel are preferred for their durability and resistance to corrosion.
Sulfur is brittle and not ductile, meaning it does not bend easily without breaking. This makes it unsuitable for making durable pipes that need to withstand pressure and mechanical stress. Additionally, sulfur is also not resistant to corrosion, further limiting its usability in pipe-making applications.
Sulfur is not suitable for making pipes because it is a brittle material that does not have the necessary strength or durability to withstand the pressure and stress that pipes must endure. Additionally, sulfur is prone to corrosion and can react with certain substances, making it unsuitable for use in plumbing applications.
Sulphur is not used in jewelry because it has a low melting point, making it unsuitable for creating durable and long-lasting pieces. Additionally, sulphur tends to tarnish and react with metals, leading to discoloration and damage to the jewelry over time. Other materials like gold, silver, and gemstones are preferred for their durability and aesthetic properties in jewelry making.
In the Frasch method, superheated water is injected into underground sulphur deposits, melting the sulphur. The molten sulphur is then forced to the surface through a vertical pipeline using compressed air, where it solidifies upon cooling. This process allows for the extraction of pure sulphur without the need for mining.
Sulphur is an important non-metallic yellow element. At ordinary temperature it exists as a solid. It melts at 119deg.c and boils at 444deg.c. It does not dissolve in water but does so in carbon disulphide. Its atomic number is 16 and relative density is 2.Sulphur is found in different forms. These are called allotropes of sulphur. Its three important allotropic forms are: rhombic sulphur, monoclinic sulphur, and plastic sulphur. The common form is called rhombic sulphur. It is made up of eightsided yellow crystals.When it is heated to more than 950deg.c, it changes into monoclinic sulphur. when the molten sulphur. When the molten sulphur is pored into cold water, it changes into plastic sulphur. Another allotrope is called flowers of sulphur. It is a yellow powder and is made by quickly cooling sulphur vapour.Large deposits of sulphur are found beneath the earth in several layers, especially in the United States. It is mined by a method called the Frasch process. This method was developed by Herman Frasch in 1891. employing this method ,three coaxial pipes of different diameters are inserted into the earth upto the sulphur bed. superheated water,at 170deg.c, is pumped down the outer pipe and compressed air is pumped down the central pipe . The sulphur is melted by the hot water and forced up by compressed air. The melted sulphur comes up through the middle pipe. It is collected in big wooden vats. Sulphur obtained by this process is 99.5% pure. Sulphur also occurs in nature as hydrogen sulphide gas, calcium sulphate and as sulphides.Sulphur is a reactive element.It burns in the air with a blue flame to form sulphur dioxide. This gas pollutes the air. Sulphur trioxide is another oxide of sulphur which dissolves in water and forms sulphuric acid.Most sulphur is used to make sulphuric acid. It is of great industrial importance. Sulphur is used in making wood pulp and for vulcanizing rubber. It is also used to make wide range of products like drugs, dyes and chemicals to kill insects and moulds. It is also used in manufacture of gun-powder and matches.
As sulphur is not ductile.
Sulfur is brittle and not ductile, meaning it does not bend easily without breaking. This makes it unsuitable for making durable pipes that need to withstand pressure and mechanical stress. Additionally, sulfur is also not resistant to corrosion, further limiting its usability in pipe-making applications.
Sulfur is not suitable for making pipes because it is a brittle material that does not have the necessary strength or durability to withstand the pressure and stress that pipes must endure. Additionally, sulfur is prone to corrosion and can react with certain substances, making it unsuitable for use in plumbing applications.
sulphur and carbon are nonmetal they are not a good conductor of heat and electricity.
It is generally caused by the building up of sulphur in the pipes if your on a well.
copper metal is ussualy used for making pipes
Sulphur is not used in jewelry because it has a low melting point, making it unsuitable for creating durable and long-lasting pieces. Additionally, sulphur tends to tarnish and react with metals, leading to discoloration and damage to the jewelry over time. Other materials like gold, silver, and gemstones are preferred for their durability and aesthetic properties in jewelry making.
Simply because plastic is most resistant to corrosion.
The reed pipes used by a satyr can bend the forces of nature thus making it able to disarm there opponents
In the Frasch method, superheated water is injected into underground sulphur deposits, melting the sulphur. The molten sulphur is then forced to the surface through a vertical pipeline using compressed air, where it solidifies upon cooling. This process allows for the extraction of pure sulphur without the need for mining.
Raw materials for making pvc garden pipe
Making Briar Pipes - 1912 was released on: USA: 23 October 1912