0
What else can I help you with?
What is the rule about the size of filter paper to be used with a funnel?
Usually, it's used to separate a precipitate from the liquid in the solution. The filter paper is folded into quarters and placed in the funnel. The solution is then poured onto the filter paper, where the liquid filters through and the precipitate stays on the filter paper. The precipitate can then be saved or discarded, depending on which part of the solution you want.
How would you separate a mixture of water and turpentine?
get yourself a seperating funnel, pour the mixture into the funnel and wait for the mixture to seperate. You should see two distinct layers that seperated, where water will be "floating" on top of turpentine. You know what to do next.
What is the correct way to get salt from a mixture of sand and salt?
If you mean seperate: Use a bunsen burner, a tripod, and a beaker. Place the beaker onto the tripod which should be on top of the bunsen burner. Pour the salt/sand water into the beaker and turn the bunsen burner onto the safety flame. Then put the beaker on the tripod, and wait for the water to evaporate.
What is the proper way of transferring liquid substances from a narrow mouth container to a bigmouth container or vice versa?
To transfer liquid from a narrow mouth container to a wide mouth container, you can use a funnel to guide the liquid. For the opposite transfer, you can use a pipette or a small pouring spout to control the flow of liquid into the narrow mouth container. It's important to pour slowly and steadily to avoid spills.
How could you separate a mixture of wax and sand?
Combine the mixture with water, the salt will dissolve leaving sand and a saline solution, filter out the sand with filter paper or by vacuum desiccation, take the saline solution distill it through a condenser pipe. Hope that helps
Which method gives the best results when separating a mixture of sand and water?
Filtration. Place a glass funnel over a beaker, and put a circle of filter paper inside the funnel. Pour the sand-water mixture into the filter paper. The sand should get trapped by the paper, but the water should seep through into the beaker.
How do you separate powdered copper sulphate and powdered chalk?
Well, you need to get a beaker and add water.Then add the powdered chalk and add copper sulphate to the beaker.Then get a conical flask with a funnel and get some filter paper and fold it into a funnel and place it the funnel in the conical flask then mix your solution with a stiring rod and pour down funnel .What you should end up with is copper sulphate with the water in the conical flask and the chalk mix in the filter paper.
What is the rule about the size of filter paper to be used with a funnel?
Usually, it's used to separate a precipitate from the liquid in the solution. The filter paper is folded into quarters and placed in the funnel. The solution is then poured onto the filter paper, where the liquid filters through and the precipitate stays on the filter paper. The precipitate can then be saved or discarded, depending on which part of the solution you want.
What does filter paper represent?
filter paper is a suitable medium for separation of gelatinous precipitates. the funnel should match the filter paper in size.and funnel and in angle of 60 dagree of extend to 1-2 cm below the bream of the funnel good lock and see you next time hangu paskalay s abid husain rand
What is filtering paper?
filter paper is a suitable medium for separation of gelatinous precipitates. the funnel should match the filter paper in size.and funnel and in angle of 60 dagree of extend to 1-2 cm below the bream of the funnel good lock and see you next time hangu paskalay s abid husain rand
During Filteration the stem of a funnel should?
During filtration, the stem of a funnel should be kept open to allow air to escape and prevent pressure build-up within the funnel. This helps to maintain a steady flow of liquid through the filter paper and prevents splashing or spillage.
Which of the following pieces of equipment should be used to separate a mixture of salt water magnet B balance C funnel D hot plate?
Look at each of the options and really think about what each one would mean and need. To separate a mixture of salt waterA magnet - There is no metallic substanceB balance - There is nothing to weighC funnel - A funnel can direct water away, but the salt is IN the water.D hot plate - If you heat a salt-water mixture, the water will evaporate, and the salt will crystallize and be left behind. So I would choose D.
How can you separate mixture of water containing fine sand?
One way to seperate a mixture containing fine sand and water is through a process called filtration. Pour the mixture through a coffee filter over a glass or bowl. The sand should collect in the filter and the water should go through and settle in the bowl below.
How would you separate a mixture of water and turpentine?
get yourself a seperating funnel, pour the mixture into the funnel and wait for the mixture to seperate. You should see two distinct layers that seperated, where water will be "floating" on top of turpentine. You know what to do next.
What equipment and materials will you use in separating insoluble materials from seawater?
You can filter it off using a sinted glass crucible, fine filter paper, a vacuum pump and a side-arm flask. If you don't have that sort of equipment: a filter funnel, filter paper and a conical flask should do.
How can you separate a solid from a mixture?
Lets say you have mixture of sand and salt. Put your mixture on a filter paper and by using a strong magnet you should be able to separate sand from salt. Using a magnet is a powerful way to separate out one solid from another in a mixture.
How full should a funnel be filled with solution in a filtration procedure?
In a filtration procedure, a funnel should typically be filled to about one-third to one-half of its capacity with the solution. This allows for efficient filtration without risking overflow or splashing. Additionally, leaving some space helps accommodate any potential foaming or bubbling that may occur during the process. Always ensure the filter paper is properly seated in the funnel to prevent clogging.
