Yes, hexane can damage PVC pipes by causing swelling or softening of the material. It is not recommended to use hexane with PVC pipes due to the potential for degradation and leakage. It is advisable to consult the manufacturer's guidelines for compatible solvents.
Yes, bleach can harm PVC pipes if used in high concentrations or left to sit in the pipes for an extended period of time. It can weaken the PVC material and cause it to become brittle, leading to potential leaks or cracks in the pipes. It is generally recommended to dilute bleach thoroughly and not to use it regularly on PVC pipes.
Yes, sulfuric acid can damage pipes due to its corrosive properties.
PVC does not react chemically with concrete, but PVC has a very large dimensional change when the temperature changes , so pipes that are carrying warm water expand. There are products available to wrap pipes going through concrete so that they have room to expand and do not wear through from grinding back and forth against the concrete as they expand and shrink.
Yes, there can be a chemical reaction between PVC and concrete, particularly in the presence of moisture. The alkaline nature of concrete can lead to degradation of the PVC material over time. This can result in the weakening of the PVC pipes or fittings in contact with the concrete. Proper insulation or protection is recommended to prevent this reaction.
Sulfuric acid is not safe for pipes as it is a highly corrosive substance that can cause damage to pipes and other materials it comes into contact with.
No, plumber's putty should not be used on PVC pipes. It is not compatible with PVC and can cause damage to the pipes. It is recommended to use a PVC-specific sealant or cement for PVC pipes.
Yes, PVC pipes can be unglued without causing damage by using a PVC pipe primer and solvent cement to soften the adhesive bond and carefully separating the pipes.
If your talking about baking soda and vinegar -- NO --
PVC is a compound.The pipes are not a compound but they are made from a compound.
Pvc pipes are cheaper. They are easier to join. They last longer.
PVC stands for polyvinyl chloride, which is what PVC pipes are made of.
The best type of cutter for PVC pipes is a ratcheting PVC pipe cutter. It provides clean and precise cuts, making it easier to work with PVC pipes.
To effectively separate stuck-together PVC pipes, you can try using a lubricant like dish soap or a commercial PVC pipe lubricant to loosen the connection. Alternatively, you can use a heat gun to gently heat the pipes, which can help soften the PVC and make it easier to pull them apart. Be careful not to overheat the pipes, as this can cause damage. Another option is to use a PVC pipe cutter to carefully cut through the stuck area and then replace the damaged section with a new piece of PVC pipe.
PVC pipes are more flexible and resistant to chemicals compared to ABS pipes. However, ABS pipes are generally more durable and impact-resistant than PVC pipes.
Because modern PVC and PEX pipes are much more efficient and easier to work with.
The recommended installation procedure for 2 schedule 40 PVC pipes involves cutting the pipes to the desired length, cleaning the ends with PVC primer, applying PVC cement to the ends, and then joining the pipes together firmly.
Yes, bleach can harm PVC pipes if used in high concentrations or left to sit in the pipes for an extended period of time. It can weaken the PVC material and cause it to become brittle, leading to potential leaks or cracks in the pipes. It is generally recommended to dilute bleach thoroughly and not to use it regularly on PVC pipes.