yes
Ash is left over when wood is burned in a fireplace. Ash is the residue that remains after the combustion process, consisting mostly of mineral content from the wood.
No, you cannot burn ash in a fireplace because ash is already a byproduct of burning wood. It is the residue left behind after the wood has been burned.
When wood burns, it undergoes a combustion reaction and primarily produces carbon dioxide, water vapor, and ash. The ash residue consists of the non-combustible components of wood such as minerals and carbon remnants.
Wood ash (potash) is the main result of burning wood and potash can be used in the garden as a fertilizer. Also, if wood is slowly burnt (charred?) in a kiln, where oxygen is kept out, charcoal is produced.
When you burn a wood, the volatile gases present in the wood heat up to about 500 degrees Fahrenheit. The compound molecules break apart, followed by the reintegration of the atoms with oxygen, as well as carbon dioxide and other substances. After the burning process, the water in the wood is lost, and the only components that remain are the noncombustible ones, including carbon, potassium, and calcium. ----- The wood is destructively distilled. Molecules of cellulose are broken down to carbon, ash, carbon monoxide, methanol, and a variety of larger molecules that are collectively referred to as creosote. The carbon monoxide is burned into carbon dioxide, and the methanol is burned into carbon dioxide and water, as is the creosote, if there is enough oxygen. In the end the carbon can also burn into carbon monoxide and then carbon dioxide. If the combustion is complete, you have ash, carbon dioxide, and water vapor. If the combustion is incomplete you might still have a clean fire that leaves charcoal, but that will happen only if the fire is regulated to produce that result. Unregulated incomplete combustion produces creosote smoke, which can be quite nasty.
No, not any substance, but some, and here's why. Methanol has a density of 0.79g. If you put something in the methanol, say wood (oak), that weighs 0.89g, which is more, it will sink. It all depends on if it weighs more or less than the methanol. If it weighs more, it will sink, If it weighs less, it will float.
The cost of a block of ash wood can vary depending on the size, quality, and supplier. On average, a small block of ash wood can range from $5 to $20, while larger blocks or higher-quality wood can cost up to $50 or more. It's best to check with local suppliers or woodworking stores for current pricing.
Ash wood is natural and comes from the Ash Tree (Fraxinus).
No Oak wood comes from the trunk of an Oak tree. It is therefore an organic compound. no it isn't
Maple is stronger than ash. Ash is still a very durable floor.
ash comes from the middle of the earth. that is why it's called ash it gets burnt a lot in the core of the earth. if you burn wood you get ash
Ash wood sinks in water because it has a higher density compared to the density of water. Objects with higher density than water will sink, while those with lower density will float. Ash wood is denser due to the structure and composition of its cells, causing it to sink in water.
wood
If it's solid ash wood, then it is pretty good and nice!
The amount of ash produced during combustion relative to the amount of fuel fed into the wood pellet stove. Ash content is one indicator of quality for wood pellet fuel. Ash content for wood pellets should be between one and three percent. 

type of wood used: from ash tree.
Ash is left over when wood is burned in a fireplace. Ash is the residue that remains after the combustion process, consisting mostly of mineral content from the wood.