answersLogoWhite

0

Drano is designed to dissolve organic materials like hair and grease, not fabric like a washcloth. It is not recommended to use Drano to dissolve a washcloth stuck in a garbage disposal. It is best to manually remove the washcloth or seek professional help if necessary.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

Can you use drano in a garbage disposal?

No definitely not. Drano should not be used anywhere. It is very harmful to your plumbing


Will drano dissolve cotton?

No, Drano is a caustic chemical usually used for clearing drains and pipes. It is not designed to dissolve cotton, and using it for this purpose could be dangerous.


How do you plumb a garbage disposal in a sink with one drain?

Same as you would for a double sink. There is a short tail piece with the disposal that attaches with a flat plate and a short bolt. Install the disposal on the sink and route the drain as needed. There has to be a trap between the disposal and the drain.


What is the base found in Drano?

The base found in Drano is typically sodium hydroxide, also known as lye or caustic soda. It is a highly alkaline substance that helps break down and dissolve organic matter in clogged drains.


Can drano be used in a dishwasher?

I strongly advise against using drano. The drain line from the dishwasher to the garbage disposal is pretty short. Try running your dishwasher and fill up your sink, when your dishwasher starts to drain, pull the plug on the sink and start your garbage disposal. You may be able to get away with using Drano a few times, but the thin plastic tube will be made brittle and possibly break in the future, also you will want to run it empty a few times if you do use a chemical. Odds are the clog is at the drain and you have some clearly nasty junk clogging it that will require some manual work. I recommend cutting up a coat hanger and bending a small hook on the end to clean it out. There could be other electrical / mechanical issues with your dishwasher, you may want to have a trusted service technician take a look.


What is the pH of drano?

Drano has a high pH level, typically around 14, due to its strong alkaline ingredients such as sodium hydroxide. This high pH allows it to effectively dissolve clogs in drains by breaking down organic materials. It is important to handle Drano with care and avoid contact with skin or eyes due to its caustic nature.


How do you you determine the percentage of sodium hydroxide in solid Drano?

To determine the percentage of sodium hydroxide in solid Drano, you can first dissolve a known mass of Drano in water and then titrate the solution with a standardized acid solution (e.g., hydrochloric acid). The amount of acid needed to neutralize the sodium hydroxide in the Drano solution can be used to calculate the percentage of sodium hydroxide in the original solid.


Can Drano crystals be used in soapmaking?

Drano


When was Drano created?

Drano was created in 1923.


What is the scientific name for drano?

The scientific name for Drano is sodium hydroxide, also known as lye or caustic soda. It is a strong base used in many household cleaning products, including drain cleaners, due to its ability to dissolve organic material and unclog pipes.


What is the pH reading of 10 percent drano?

Drano is an alkaline cleaner.


Is there bleach in Drano?

Yes, Drano contains sodium hypochlorite, which is a form of bleach.