marble because it weight is more
Salt water melts faster than fresh water because salt lowers the freezing point of water. This means that salt water needs to be even colder than fresh water to freeze, leading to a faster melting rate when exposed to warmer temperatures.
The plastic disk would float on top of the water but sink below the layer of oil in the glass container. This is because the density of the plastic disk is in between that of water and oil.
The density of the marble would be determined by dividing the marble's mass (12.5 g) by its volume (5ml), which would give you 2.5g/ml.
Salt water boils more rapidly then unsalted water.
when water (the moisture in the bread) evaporates from a sandwich on a plate, it escapes to the open air. when it is plastic wrapped, this water vapor does not escape--as evaporation proceeds, the partial pressure of water builds up, slowing down further evaporation.
A marble will sink faster in salt water compared to fresh water due to the increased density of salt water. The speed at which the marble sinks will depend on factors such as the size and weight of the marble, as well as the concentration of salt in the water. Generally, the denser the water, the faster the marble will sink.
A marble will sink faster in water than in oil because water has a higher density than oil. The higher the density of the liquid, the faster an object will sink in it.
A plastic cup is a good conductor of heat, meaning it allows heat to transfer quickly out of the cup and into the water, helping it cool down faster. The plastic material also has less thermal mass than glass or ceramic, so it cools down faster itself, helping to cool the water more efficiently.
Water freezes faster in metal compared to plastic due to the higher thermal conductivity of metal. This means that heat is transferred more efficiently from the water to the metal, allowing it to cool down more rapidly. In contrast, plastic has lower thermal conductivity, leading to slower heat transfer and a longer freezing time for the water.
Tin pan, because it conducts heat better than a plastic pan.
Water in a metal cup will freeze faster because metal conducts coldness and energy the most. trust me, I did a project with a metal, plastic, glass, and paper to see which cup would freeze the quickest. Hopefully this answer helped.
Water gets freeze in a can rather than plastic container because plastic sis a non conductor of heat and chillness.
No the water would drain around the chips. They would not absorb water.
When you put metal in water it cools down quick. When you put plastic in the microwave, you're in for a big problem....Plastic is the answer.
A plastic cup holds more heat because plastic can't take out heat. Glass conducts heat away.
it would be faster
No, water does not typically allow marble to fall through easily as the surface tension and density of water can prevent objects from sinking quickly. Marble would likely float on the surface or sink slowly in water.