The change in viscosity of silicone oil very small with change in temperature as compared to ordinary lubricants. If temperature is dropped from 100-0*c, viscosity of petroleum increases to 100 fold while of silicone increases to less than 4 folds only. Due to these reasons silicone oils are preferred over ordinary lubricants.
silicones have much greater thermal stability than odinary hydrocarbons oil,greases and rubber
I consider that this preference is only illusory.
Glass can always be cut by diamond, so if precision is required over a variety of glass types, diamond will be preferred as the cutting tool.
most disc cleaning solutions are diluted alcohol and some silicone additive, so dilute the alcohol before use. Keep in mind that repeated use may cause etching over time.
A burette is preferred for titration over a measured cylinder because it can give a finer volume reading. You can also add in all your chemicals at the start of the experiment.
because1) knee voltage of silicon is .7V where as germanium has .3V 2)silicon breakdown take place at around 200 0C and germanium at 90 0C
The change in viscosity of silicone oil very small with change in temperature as compared to ordinary lubricants. If temperature is dropped from 100-0*c, viscosity of petroleum increases to 100 fold while of silicone increases to less than 4 folds only. Due to these reasons silicone oils are preferred over ordinary lubricants.
Swimming caps can be made out of Latex or Silicone. Silicone is most preferred as it stretchs over the head easier, rather than latex caps.
if you mean why is a desktop preferred over a laptop. then i would answer that they aren't and that laptops are preferred because of their convenience
The three biggest difference between common and preferred shares are: 1) Preferred shareholders take priority over common shareholders in the event of a company is liquidated. 2) Preferred shareholders typically have more voting rights than common shareholders. 3) Preferred shares typically pay higher dividends than common shares.
The molecules of lubricants can slide over each other due to the weak attractions between them and hence they allow the machine parts to slide over each other smoothly reducing friction and damage.
Interval estimates are generally to be preferred over point estimate
specialized equipment and multiple blending agents are more difficult to maintain in an integrated refining plant than in a lubricants plant.
Silicone stays flexible where as standard roofing tar hardens and cracks over time.
Preferred shares in a company represent a larger interest in the company than common shares do. Preferred shareholders are paid dividends first, regularly and typically at a higher rate than common shareholders, and if the company declares bankruptcy they have priority over common shareholders who are last in line to get paid.
yes
Transity of preference is one of the axioms common to most models of decision theory. It means that if choice A is preferred over choice B and choice B is preferred over choice C, then choice A should be preferred over choice C.
Chicken is preferred over beef as it is deemed healthier.