Bec. the steel percentage in the concrete is very low therefor we dont deduct the steel qty. from the concrete qty.the Cocrete qty. vastage is more than used steel qty.
Percentage of steel in RCC is about 1-2%.
In construction RCC means reinforced cement concrete, however RCC Pardi is a versatile and hardy roofing material. Yes, it is composed of reinforced cement concrete. The reinforcement is typically steel.
RCC stands for reinforced concrete cement. it is a building structure made by combining the steel rod with cement concrete mixture. like beam ,pillers etc.
column curtailment details
Quantity of steel in building is calculated in many method. many engineer use to quantify the quantity of steel in a building by referring to detailed planned so they can compute the approximate weight of steel needed.
Steel Cannot be calculated based on cft. Load bearing capacity is required to calculate steel.
About 2.27 kg of steel bars is used for the RCC slab of size 50' 18' 4.5.
For a raft foundation, the amount of steel required is in RCC per square meter. This can be calculated using the value of 18 kilograms steel per square meter.
Percentage of steel in RCC is about 1-2%.
Concrete is very strong in compression but weak in tension. RCC is concrete with reinforcing steel bars in it. Steel is a really good material in tension. Steel carries the tensile load and thus RCC is strong in tension too. However, designers still try to ensure concrete is in compression wherever possible.
In construction RCC means reinforced cement concrete, however RCC Pardi is a versatile and hardy roofing material. Yes, it is composed of reinforced cement concrete. The reinforcement is typically steel.
To prevent from the corrosion of steel...
RCC stands for reinforced concrete cement. it is a building structure made by combining the steel rod with cement concrete mixture. like beam ,pillers etc.
Steel uses I shape that bear more shear load, that is why it is typically used for high buildings, while concrete is used for small building due to the low shear force it can bear. RCC will need more area as the number of floors get higher, the steel structure don't.
column curtailment details
The minimum area of steel required in RCC slab as per BS code is 0.12 to 0.15% of total area. The maximum diameter of bar in slab, shall not exceed D/8, where D is the total thickness of slab.
RCC