1400kg/m3
Coarse aggrete is code 383
2.64
1.5 tonnes per Cubic metre.
RCC that is reinforced cement concrete which is composed of cement(mainly),sand(fine aggregate),metal(coarse aggregate)and water.Which is further more supported by iron which makes it RCC from ordinary cement concrete.
For M7.5 the ratio is 1:4:8 i.e 1 part of cement, 1 part of fine aggregate (Sand) and 1 part of coarse aggregate.
what is the density of 40mm coarse Aggregate
20 mm thick coarse aggregate use in slab cast
The weight of coarse aggregate required to fill one cubic meter depends on its density, which typically ranges from 1,500 to 2,500 kilograms per cubic meter. Therefore, one cubic meter of coarse aggregate generally weighs between 1.5 to 2.5 tonnes. For example, if using a density of 2,000 kg/m³, one cubic meter would equal 2 tonnes. Always check the specific density of the material being used for accurate calculations.
Coarse aggregate can also be described as gravel, crushed rock, rocks or stones.
fine aggregate zone classification codes
20 mm thick coarse aggregate use in slab cast
Coarse aggrete is code 383
The density of course aggregate is 1560 km/ m^3. The density of something can be found by dividing the mass by the volume.
because its very good
rock crushing
2.64
If by aggregate you mean the 'rock' mixed in to make concrete, then the density is usually about 2.7 g/cm3 .