girder is the main horizontal beam . the joists which are usually smaller, are connected to the girders and are supported by the girder.
yes
One-way-solid slab flexible but limited in span. one way concrete joist system allows longer spans. Wide module or skip system allows longer span and uses less concrete than the one-way joist system. Slab bands or joist bands may be used with these systems, They serve to reduce the spans of the slabs to conserve headroom in the building.
 Two- way-2 way solid slab rarely used but useful where loads are heavy. Two-way flat slab good for heavy loading, two-way flat plate good for lighter floor loading. Very flexible in column locations. Conserves headroom in buildings. Two-way concrete joists or waffle systems good for long spans.
In construction, TGI stands for "Truss Girder I-beam." It refers to a type of engineered wood or steel beam that is designed in the shape of an "I" to provide strength and support for structural applications. TGI beams are commonly used in floor and roof framing due to their efficiency in load distribution and lightweight properties.
They r the same. There is no difference.
difference between the manufacture of bricks and manufacture of tiles
It depends on the joist thickess, spacing and load it is carrying. There is not a answer without more information.
14ft to girder
plate girder is a vertical section which supports the beam while gantry girder is a horizontal section which supports the othet small beams.
You may be looking for rafter, column, joist, truss, strut, piling, stringer, stud, boom, brace, girder, jamb, lintel, pile, pillar, spar, stanchion.
A girder is the primary horizontal member carying loads from other beams and slabs connected to it. That is a girder has other beams connecting to it on its sides .Typically beams do not have other beams connecting to it but generally have only slabs transferring the loads to it. The case is similar to beam and joist combination where the closely spaced joists (floor joist and ceiling joist) transfer the loads to the beam but usually from the top rather than from the sides.
The key difference between a rim joist and a band joist in a building's construction is their location and function. A rim joist is located at the edge of a floor system and provides support for the floor joists, while a band joist runs horizontally around the perimeter of a building and helps to distribute the load of the structure.
A "girder bolt"!
That girder will be used for support.
beam girder
how do you calculate hogging of i girder
A building girder can be U shaped for several different reasons. The shape of the building girder will determine how much weight the girder can carry and how much side to side stress it can withstand.
Based on CMAA (Crane Manufacturers Association Of America) specifications, both single & double girder are equally rigid, strong & durable. This is because single girder cranes use much stronger cross girders than double girder cranes, and single girder cranes have lateral bracing, unlike double girder cranes. To know more about EOT cranes visit: vmecranes.com