0
What else can I help you with?
Concrete Foundation Installation?
form_title=Concrete Foundation Installation form_header=7683 Have there been any completed structural drawings for this project?*= () Yes () No Which kind of concrete foundation would you like?*= () Poured concrete slab foundation () Concrete pier foundation () Poured concrete basement () Concrete block foundation () Poured concrete foundation with crawlspace () Want recommendation Please specify what the purpose of the foundation is.*= () Foundation for a new home () Foundation for a mobile home () Existing foundation is beyond repair () Foundation for addition or small structure
What is a bell bottom pier concrete footing?
Piers are drilled when the ground conditions at the surface are not good for supporting a foundation. An engineer determines from an engineers soil report where the bottom of the pier needs to be. The driller has an attachment that will drill a 36" bell bottom with a shaft size of 12". The pier is drilled, the bottom formed, steel cage dropped in the hole and then filled with concrete. These piers will be placed below the grade beams of the slab.
What is an upright masonry support?
A pier, man!
What is difference between bridge pier pylon abutment?
A bridge pier is a vertical structure that supports the bridge's superstructure and transfers loads to the foundation, typically found between spans. A pylon is a taller, often decorative structure used to support cables in cable-stayed or suspension bridges, providing both structural support and aesthetic appeal. An abutment is located at the ends of a bridge, supporting the ends of the bridge span and connecting it to the ground or earth embankment, resisting horizontal forces and stabilizing the structure.
What is purpose of soling in civil engineering structures?
The main pupose of Soling is to consolidate the layer for purpose of laying foundation. It consists of digging the earth to a required depth and laying the crushed stone quarries one adjacent to another and filling the gaps with the sand. After laying for the entire area, consolidating with the Heavy Rollers or by ramming is done. Over this either a pier or regular foundation is carried out.
How can I enclose a pier and beam foundation?
To enclose a pier and beam foundation, you can use materials such as concrete blocks, bricks, or treated wood panels. These materials can be stacked or installed around the perimeter of the foundation to create a barrier. Additionally, you may need to add insulation and moisture barriers to protect the enclosed space from the elements.
What is the recommended spacing for a pier and beam foundation to ensure proper support and stability?
The recommended spacing for a pier and beam foundation is typically between 6 to 8 feet apart to ensure proper support and stability.
How do you build an economical foundation on a steep slope?
Depending upon the particulars of the site being built upon, a pier and beam (or post and beam) foundation is the most economical on a steep slope. This is designed for a smaller building that does not require heavy retaining walls and is not in an area prone to earthquakes.
Is a pier a pile foundation?
pile is the steel layer and pier is the outer most layer'
Spacing a pier and beam foundation?
Spacing in a pier and beam foundation is crucial for ensuring structural stability and load distribution. Typically, piers should be placed 6 to 8 feet apart, although this can vary based on soil conditions and the weight of the structure. Proper spacing helps prevent excessive movement and settling, which can lead to structural issues. It's essential to consult local building codes and a structural engineer for specific requirements related to your project.
Concrete Foundation Installation?
form_title=Concrete Foundation Installation form_header=7683 Have there been any completed structural drawings for this project?*= () Yes () No Which kind of concrete foundation would you like?*= () Poured concrete slab foundation () Concrete pier foundation () Poured concrete basement () Concrete block foundation () Poured concrete foundation with crawlspace () Want recommendation Please specify what the purpose of the foundation is.*= () Foundation for a new home () Foundation for a mobile home () Existing foundation is beyond repair () Foundation for addition or small structure
What are the advantages of using a shed pier foundation for building a small storage shed?
A shed pier foundation offers advantages such as cost-effectiveness, durability, and ease of installation for building a small storage shed.
What is the recommended pier and beam spacing for a single-story house?
The recommended pier and beam spacing for a single-story house is typically between 6 to 8 feet apart. This spacing helps provide adequate support and stability for the structure.
How many pier blocks are needed for a shed foundation?
The number of pier blocks needed for a shed foundation depends on the size and weight of the shed. Typically, one pier block is needed for every 4-6 feet along the perimeter of the shed. It is recommended to consult with a professional or follow the shed manufacturer's guidelines for the exact number of pier blocks required.
Does the fire rated partition separating the two residences in a two family home that is raised on a pier and beam foundation need to continue to the ground?
It varies from location to location, but nearly all locations require that a firewall run from the basement floor all the way up to the roof. You should check with your local building inspector if you want to do something different.
What are Shims in pier and beam Foundations?
Shims are flat pieces of metal or wood that are used to adjust for any height differences between the piers and their contact with the desired height of the beam.
How does Home Goods compare to Pier 1?
Homes Goods is pretty comparable to Pier 1 Imports. In general, however, Pier 1 Imports has a greater selection of home decor and has slightly more expensive items.
