Aproximately 17.78 Sq Yds of asphalt @ 1" thick per ton. Aproximately 17.78 Sq Yds of asphalt @ 1" thick per ton.
Cold Mix Asphalt is a mixture of aggregate and asphalt. Cutback asphalt is a liquid asphalt. Cold Mix Asphalt is a mixture of Aggregate and Asphalt. The Asphalt is usually am emulsion asphalt or a cutback asphalt. An emulsion asphalt is asphalt cement blended with water. Cutback asphalt is asphalt cement blended with a fuel oil, kerosene, or a naptha. The water, fuel oil, kerosene or Naphta evaporates and leaves the asphalt.
16 yards
17.3 cubic yards will do it.
105 m = 114.829 yrd
A 20'x35'x4" drive requires 8.64 cubic yards.
four
A ton of asphalt typically covers about 80 to 100 square yards at a thickness of 4 inches. This coverage can vary based on the specific type of asphalt and compaction factors. For precise calculations, it's best to consult the manufacturer's specifications or local guidelines.
Asphalt installation is usually bid by the square yard, the installer will buy asphalt by the ton, and it will be delivered in a truck measured in cubic yards. Therefore, a volume/weight/area ratio is required. In short, an estimator will typically assume that one square yard of compacted asphalt laid one inch deep will weigh approximately 111 pounds.
The type of product measured does not change its weight requirement; a ton of feathers and a ton of asphalt all weigh: 2,000 pounds in American and 2,240 pounds in the United Kingdom; systems of measurement.
The amount of square feet in a ton of asphalt will depend on the thickness of the asphalt. If the asphalt is three inches thick it will have to cover the area three times. The type of asphalt used is also a factor towards weight.
You have not said what substance you are using a ton of to cover the asphalt.
You needed to specify to what depth the asphalt is being laid.
Something on the order of .6 yards per US ton
250 per ton
$ 130.00usd per ton
This depends on many factors like the area of the pavement being covered and the thickness of the pavement. This question is very general and can have many answers. Here are some conversions to help figure out how many sq ft 1 ton of asphalt cover. 0.056 tons asphalt/ SY (1 in thick) and 9 sf/1 SY. using these conversions will yield an answer of 1 ton of asphalt (1 in thick) coverinig 160.7 sf
There is about 2800lbs in 2 yards of top soil.