answersLogoWhite

0

Derrick crane, derrick, hoist, Scotch crane, jib crane

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Civil Engineering

How is tower crane efficiency measured?

efficency of crane shovel families


What is the cost of 10 ton eot crane?

209000


How a Tower Crane is dismantled?

Very tall tower cranes use the self-jacking section of the mast to remove one mast section at a time. Once the main boom is near ground, a conventional crane removes the main boom and counter weights in sequence. Small tower cranes are removed without using the self jacking section by a conventional crane. In rare cases, stiff leg derricks and evenhelicopters can be used.I think to dismantle the tower crane should do these works as follows:1, under normal conditions, will be lifting Gan parallel to the building facades, removal of tower structure using the standard bottle top section, so that gradually the small drop tower, down procedures top-up procedures for the opposite. Until the tower fell to the initial installation height,then with crane tower crane to install according to the order of removal of the opposite.2, in the unusual circumstances, such as the tower fell to the initial installation of a high degree of obstructions can not let the boom down when the order of installation, can be used cranes, lifting arm in the air will be divided into 2 ~ 3 removed but there must be a reliable security measures.3, shaft independent drop tower method. France to adapt to the independent drop tower tower crane installed in the concave on the inside corner of the construction location, due to boom can not continue to decline in the tower on the roof, when lifting arm can be fitted with hinged Department - Auxiliary lifting equipment This would allow the tower continues to fall as well as removal of attached devices so on. Tower in the process of falling down all the parts removed from the auxiliary lifting equipment transported to the ground, until reduced to the initial installation height, in accordance with crane installed in reverse order followed by demolition.The information are from jinan "huiyou"construction hosit company, http://www.towercraneofchina.com/xwzx4.asp?code=wz0000000000022this web has more information , you can go to have a look!


What is a mobile crane and what are the uses?

A mobile crane is a versatile lifting machine mounted on a wheeled or tracked vehicle, allowing it to move easily between job sites. Unlike fixed cranes, it doesn't require permanent installation. Mobile cranes are used for lifting and moving heavy materials in construction, infrastructure projects, industrial sites, and event setups. Their flexibility, quick setup, and ability to access tight spaces make them ideal for short-term or multi-location jobs.


What is factor of safety in Crane load lifting?

If SLI is in operating condition then sLI itself will indicates that whether load is in safe mode. But if SLI is not working then one must be considered 40 % factor of safety of crane SWL and in SLI working condition it will be considered 20 % of its SWL.