In this instance VCT stands for Vinyl-Carpet- Tile ! If a spec says to install a VCT Floor, it is poorly written, however it reflects an intention of having one of these types of finishes on the completed Project..
DW in a kitchen floor plan means Dish Washer.
In a floor plan, "DN" stands for "Down", indicating a staircase or level change going downward from the current floor. It tells you that the stairs or steps in that location lead to a lower level—such as a basement or the floor below. Similarly, "UP" would indicate stairs going upward to the next floor.
Green screed by BAL
When you construct ground floor of your house then it provides following benefits to you. The first major advantage of ground floor is that it has direct access to a garden. Living on the first floor feels most like living in a single family home. No trapsing past other people's doors on the way to your own - you simply walk straight into your home. In summer season, ground floor apartments stay cooler than upper apartments. On quiet, pretty streets, ground floor apartments actually have a nice connection to the life going on outside.
advantages: floor wil get more smoother and in a level plane...because if we do not give floor finishes, it will be difficult to walk through it.. disadvantage: an extra load is come into picture...and we will have to count into consideration of total load..
When the VCT is old and worn. When there is possibility of staining. When there is high traffic. When you want the floor to really shine after applying floor finish over 2 coats of sealer.
no answers? huh... this is a great site.. ;[
VCT stands for vinyl composition tiling and VAT means vinyl asbestos tiling. VCT flooring is made of a vinyl combination material and is the most popular type of floor tiling on the market.VAT can present a hazard due to the asbestos. It is found mostly in older buildings and homes. Read more: How to Know VAT or VCT | eHow.com http://www.ehow.com/how_7500036_vat-vct.html#ixzz29kll0neX
Yes you can install vct over existing vct. The existing vct must be well adhered to the subfloor, no loose tiles or cracked and chipped tiles. If tiles are missing or must be removed you will need to patch in those spots with a suitable portland cement leveler or new pieces of vct. You will need to sand off the wax layer that may be present on the existing vct because if it is left on it can wear loose over time causing adhesion failure of the new vct and glue. Sweep all dust and contaminants from the floor.
You would be putting a permanent floor over a temporary floor & that would not be wise. Might work but if it doesn't you lose it all...
a good range is $1 - $1.25 a sf, lower if you have large quantities.
Well hate to go for the obvious but a Floor polisher is a 60 pound upright rotary floor buffer that is designed to shine up VCT & Linoleum flooring with a waxy compound and a buffing pad.
Stripping and waxing VCT can cost anywhere between 20-30 cents per square foot depending on the condition of the floor. To scrub and recoat costs about 15-20 cents per square foot.
twin-indepedent variable cam timing (Ti-VCT)
The cost to lay down a luan sub floor is $15 per sheet, and this would include the material.
check your answer
check your answer