14m
Over lap of steel bar is provided 60 times of dia of steel bar. For example (.5") dia steel bar overlap length is (30"). (.5x60=30")
500W in steel bar means this steel yields 500MPa strength
Extreme Steel bar is known as re-bar ( Reinforcing Bar), with two longitudinal and transverse ribs on the diameter of Bar.
Lap Length is the length overlap of two rebars tied to extend the reinforcement length. Lap Length of about 50 times the diameter of the bar is considered safe. Let us understand the term “lap length” with an example: suppose there is a need to build a 200ft tall structure, say column. We know that for convenience of transportation, standard length manufactured are upto 12 metre only, hence to strengthen the structure overlapping of two or more bars are done side by side upto the design length. Reason for doing so is the required tension forces that is needed to transferred from one bar to the other. So if diameter of tmt is A then lap length will be 50A. If both diameter is same. Now coming to question, lap length of tmt 550 grade is usually done where minimum bending stress is encountered. We at Shree Ji Steel offer wide range of sizes and grade for various product range which can be checked from our website Shree Ji Steel Corporation.
a bar\
40ft
Over lap of steel bar is provided 60 times of dia of steel bar. For example (.5") dia steel bar overlap length is (30"). (.5x60=30")
A short standard iron bar is a solid, straight metal rod typically made of iron or steel, with a standard length that is shorter than average for a standard iron bar. It is commonly used in construction, manufacturing, and other industrial applications for structural support or reinforcement.
Over lap of steel bar is provided 60 times of dia of steel bar. For example (.5") dia steel bar overlap length is (30"). (.5x60=30")
9 MTRS.
if the bar length is 5o m , what will be the actual length including lap length
The standard towel bar length typically used in bathrooms is around 24 inches.
volume of steel multiplied by7850= wt of steel in kgs. Please note that wt of 1 Cum steel is 7850 kg Volume of steel bar can be calculated = cross-sectional area of bar X length cross-sectional area of Bar= pie x d X d/4 (where d is diameter of bar)
five to six meters
A standard short bar used in weightlifting typically measures around 5 to 6 feet in length and weighs about 15 to 25 pounds. It is designed to hold standard weight plates with a 1-inch diameter hole. The bar itself is usually made of steel and has a knurled grip for better handling during lifts.
In steel terms, "Ln" typically refers to the notation for the nominal length of a steel product, such as a beam or bar. It indicates the standard measurement used for the length of the steel piece, which is crucial for ensuring proper fit and structural integrity in construction and engineering applications. Additionally, the term may be used in design specifications to denote lengths in calculations or material requirements.
The weight of a 10mm steel reinforcement bar is approximately 0.616 kilograms per meter.