0
What else can I help you with?
What percentage of Ash used in cement?
About 10-25 % by weight of ashes can be used in cement.Ash is generally a replacement material in cement.Some of the ashes addes in cement are volcanic ashes, fly ashes, blast furnace slags.
How long does poly cement take to dry?
It takes at least 10-25 minutes to be dry on the surface but at least an hour for it to be fully dry
What is the cement sand mortar coverage rate for rendering?
The coverage rate for cement-sand mortar used in rendering typically ranges from 12 to 15 square meters per bag of cement (approximately 25 kg) when applied at a thickness of about 10 mm. This rate can vary based on factors such as the texture of the surface, the skill of the applicator, and the specific mix design of the mortar. It's important to consider these variables for accurate calculations.
Cement consumption per cum of all grades of concrete?
m15- 6.25 m20 - 6.8 m25 - 7.5 m30- 8.5 m35- 9 m40 - 10
How much sand and cement you need to lay 65 sqm?
To lay 65 square meters of concrete, the amount of sand and cement required depends on the thickness of the concrete layer. For a typical thickness of 10 cm, you would need approximately 0.65 cubic meters of concrete. A common mix ratio is 1 part cement to 2 parts sand to 3 parts gravel. In this case, you would need about 130 kg of cement and around 0.26 cubic meters of sand. Adjustments may be necessary based on the specific mix design and project requirements.
Top 10 cement companies in world?
which are top 100 cement companies in the world
What are the release dates for Operation Repo - 2007 Cement Mixer 10-10?
Operation Repo - 2007 Cement Mixer 10-10 was released on: USA: 9 April 2012
If the original quantity is 10 and the new quantity is 3 and what is the percent and decrease?
The percent decrease is calculated by taking the difference between the original quantity and the new quantity, dividing it by the original quantity, and then multiplying by 100. In this case, the percent decrease would be (10 - 3) / 10 * 100 = 70%.
What is unsoundness of cement?
when we test the cement with the help of Le-Chatlier apparatus and then we found if the expansion is more than 10 mm then the cement is said to be unsoundness
How Do You Figure Out 10 percent Of A Quantity?
Divide it by 10
What are the release dates for Bump in the Night - 1994 Neat and Clean Nothing But the Tooth 2-10?
Bump in the Night - 1994 Neat and Clean Nothing But the Tooth 2-10 was released on: USA: 1995
What is cement color?
The colour of cement is Grey.The grey colour is due to the presence of iron oxide.The coloured cement consists of portland cement with 5-10% pigment.White cement - pure limestone + china claychromium oxide - greencobalt - blue
What is the percent increase if the old quantity is 10 and the new quantity is 13?
The percentage increase form 10 to 13 is 30%
How many qubic feet of cement for a10x10x4?
To calculate the cubic feet of cement needed for a volume of 10 feet by 10 feet by 4 feet, you multiply the dimensions: 10 x 10 x 4 = 400 cubic feet. Therefore, you would need 400 cubic feet of cement for that volume.
How much cement needed for 20x26x5?
20' by 26' by 5" requires at least 10 cubic yards of cement.
Which are top 10 cement companies of the world?
CEMEX
If a quantity increases by 10 percent then decreases by 10 percent will the result be the original quantity?
No. For example, 500 increased by 10% = 550 Now, decreasing 550 by 10% results in: 495, not 500.
