OK, first off, you need a couple things. Para cord, *light weight synthetic cord* or just any plain old rope, as long as its not thicker then your pinky finger. A steel bar, find a good quality coat hanger, made of steel perhaps, it must/should be at least twice the thickness of your rope, unless your rope is as thick as your pinky. A large nail, or screw, would easily work. Home depo, or other hardware stores have barn nails, buy one. Now you will need some zap straps. There easy to find. Now fasten the rope 2-5inches underneath the tip of the point on your spike, use about 5 straps. Experiment with different ways of weaving/twisting your rope around the spike while fastineng it. This will make the zap straps have more to grab. Now do the same at the very end of your spike. Use more zap straps, 6-8, this is the most important part. It cannot slide much at all or your spike will become dislodged and dangourous. Now, if you want, get a peice of THIN fabric that is brightly coulord and zap strap it on to the spike for more controll.
16
The new dart?, not yet, the old dart?, yes.
There is no rope in vanilla Minecraft.
with rope and blanks
Unfortunately, there is no possible way to do this since the head of the Streamline and the Buzz Be darts are different, and the stem of the dart is significantly shorter than that of a regular Nerf Dart.
Poison dart frogs are carnivores, which would make them consumers.
yes you should be able to make it fit.
Hemp and nylon are good sources for rope.
Jute is one of the natural fibers used to make rope.
Keep it tied to a rope and pull on the rope
First you need to buy or build a dart board cabinet. When you hang the dart board cabinet you want to make sure that when you put the dart board inside the bullseye is 5' 8" high.
99