Using silver wire of rectangular or square section (or other sections) or cutouts from thin silver plate.....
Make a stencil of the pattern you want to make
Copy the pattern onto the wood
For small or linear patterns cut a groove in the wood in the outline of the pattern with a tool like an X-acto, scribe or a home made tool made from hacksaw blade with a handle. For large areas use a router (micro bits are available on line). Try to keep the groove of even width and no larger than the width of the silver inlay.
See this French video - http://www.davidpriceflintlocks.com/id29.html
For linear patterns - If the groove is slightly undercut the silver wire can be carefully tapped in place with a hammer and it will stay in place. Super glue or epoxy may be used if preferred and for shapes this is a must. For shapes consider carefully silver soldering small pins on the backs of the cut out shapes. These may then be tapped into pre-drilled holes and held in place with Super glue or epoxy.
For linear patterns the silver may be worked flush with the surface of the wood by sanding and rubbed with a metal burnisher to get a good finish.
Another approach is to use dental amalgam. It comes in 800-milligram capsules. The capsules contain about 20% Mercury, 10% zinc and other materials and 70% fine silver. These capsules are placed into a machine called an amalgamator and are vigorously oscillated for about 10 seconds in a figure eight pattern a process is called trituration (grinding to a fine powder). The capsule is broken open and a lump of silver alloy spills out. The alloy has the consistency of putty and is easy to work into even small cavities. It is workable for about 2~3minutes after which it hardens. During the setting time the cavity can be filled in and leveled off with a metal spatula. After 24 hours, the inlay can be polished, carved in or engraved. The mercury is now bound with the silver and any health hazard is minimal. Mercury vapors can be driven off the alloy if its temperature is elevated above 300 deg F. A basic Silver alloy inlay package consists of an amalgamator, respirator, gloves, fifty- (800 milligram) alloy capsules, recycling and handling procedures. http:/www.turbocarver.com
A mosaic of inlaid wood.
Inlaid silver has two definitions. It is can be used to refer to a metal that is coated with silver. It can also mean a piece of silver that is embedded in another substance.
Holmes & Edwards inlaid silver is really just silver plate and does not have a high value.
Neither. They are both worthless in terms of silver content.
Yes, inlaid silver can have value, depending on factors such as the craftsmanship, age, and historical significance of the item. The quality of the materials used and the intricacy of the inlaid design also play a crucial role in determining its worth. Items with well-executed inlaid work from reputable artisans or regions can be particularly valuable to collectors. Additionally, the demand for such pieces in the market can influence their overall value.
IS stands for Inlaid silver. ie Holmes and Edwards have a full line of Inlaid silver, which is major improvement over silver palte and the IS is stamped on each piece, usualy in a square box stamp
"Inlaid" can have two different meanings relative to silver. First, silver inlay may refer to silver plate over a base metal. If the item isn't stamped .925 or "sterling," then the term refers to a form of silver plate. The silver content is very low (not reclaimable). Sterling silver must contain 92.5 % pure silver, usually mixed with 7.5% copper. Sterling silver is an alloy; the metal is homogeneous throughout the piece. "Inlaid" can also mean the silver is set into wood or another metal so that it forms part of the item's design, or is carved or molded so that precious or semi-precious stones may be set into it (usually refers to jewelry). You will need to consider the context in order to decide how the term should be defined.
Khatam-Kari
It had pillars of gold, walls of silver, and the floor was inlaid with precious stones.
International Silver - the company that took them over in 1898.
Your set of silverware stamped "Holmes and Edwards Inlaid I S" indicates that it was produced by the Holmes & Edwards Company, which was known for manufacturing quality silver-plated flatware in the early to mid-20th century. The "Inlaid I S" suggests that it features an inlaid silver process, which typically signifies a higher quality of plating. This set may hold both sentimental and collectible value, especially if it is in good condition. To determine its exact value, consider consulting a collectibles expert or researching similar pieces online.
The Ark of the Covenant, used to hold the two Stone Tablets (Exodus ch.25), was acacia wood, inlaid and covered with a thin gold layer.