0
What else can I help you with?
What type of tool is needed to take apart the AC line an remove to AC orifface tube on a 1999 Ford Windstar?
Don't know about the tool, but make sure the system is vented before you take anything apart. There are high pressure lines on it.
What is the easiest way to take apart pallets?
The easiest way to take apart pallets is by using a pallet breaker tool or a reciprocating saw to carefully disassemble the pallet boards.
How can you open a chain link without a tool?
To open a chain link without a tool, you can use a pair of pliers or your hands to twist and separate the links. Alternatively, you can use a strong and steady force to bend the links apart.
How can i Remove and replace battery in key?
You should just be able to unscrew the back of the key. if not the dealer has a tool to take them apart.
Whats the easiest way to get the ac lines apart when pulling a heater core out of a '89 sho?
First, the A/C system has to be discharged. If it is not discharged before you take the lines loose, you will be seriously injured. After it is discharged, there is a special tool that is made to disconnect those lines. That tool is available at most auto parts stores. You will not get those lines loose without that tool.
How do you repair an airless paint sprayer?
You first have to take it apart and find out exactly what is wrong with it. Usually, if this is anew tool for you the commonest problem is paint clogging.
How can you take a steering colume apart. to tighting a loss bolt on a 1989 Buick Lasabre.?
If it is a tilt wheel, you will need a special tool to remove the pivot pins.
How do you take apart a 3 piece crank on a 26 in mongoose bike?
You need a special tool called a crank puller. Then, depending on your bottom bracket you might need another special splined tool to get the BB spindle and bearings out.
What is the easiest way to take pallets apart?
The easiest way to take pallets apart is by using a pallet breaker tool or a pry bar to carefully remove the nails or screws holding the pallet boards together. This method helps to avoid damaging the wood and makes the process more efficient.
How do I remove the radio from a 1996 Lincoln Town car?
I had to take the dash apart to get it out, there is little bolts you can see throughout the dash, it's a pain NOT NECESSARY TO TAKE DASH APART.. go to a chain auto parts store...the kind who lend you tools and test things for you for free... they have a 'gadget' tool that pushes in the 2 holes you dont notice and out pops the radio. once you have seen it done you can make your own tool with ease.
How do you replace the distributor bearing on 92 accord ex?
remove dist and take it completely apart. You have to cut the old bearing off with a dremal tool then put it back together
What is the best way to take pallets apart efficiently and safely?
The best way to efficiently and safely take apart pallets is by using a crowbar or pallet breaker tool to carefully pry apart the boards. Start by removing the nails from the top deck boards first, then work your way down to the bottom deck. Be sure to wear gloves and eye protection to prevent injury.
