0
I greatly hope someone who has had personal experience with this comes to answer your question, but until they do I'm giving you my guesses.
I think the problem will be the physical connection. I don't think you can physically connect your 50 amp male connector to the park's 30 amp female. That said, 50 amp service provides 220 volts. It's my understanding the the other 110 leg (that creates the 220) is only used to power a second air conditioner and also your 220 electric range/oven if you have one. If you don't have an 220 kitchen and don't need the second AC you can run your RV off a 30 amp service.
To do this I think you will have to have someone who knows what they're doing wire a 50 amp to 30 amp adapter cable. I guess I'm kind of surprised 50 amp RVs don't come with a 30 amp adapter cable and instructions on how it can be used, but I don't own an RV so all this could be wrong.
What else can I help you with?
What is the gauge for 6 Amp?
50 amps
How many amps per leg can you pull on a 50 amp 3 phase connector?
On a 50 amp 3 phase connector, you can pull 50 amps per leg. This means that each of the three phases can carry up to 50 amps individually, resulting in a total capacity of 50 amps per leg.
What size circuit breaker is used for a 10000 watt single phase cooler with 240 volts?
The equation for amperage is Amps = Watts/Volts = 10000/240 = 41.6 amps. It is not stated if this is a motor load or not. If it is a motor load then the feeder has to be rated at 125% x 41.6 = 52 amp wire. Also if it is a motor load then the breaker will have to be 250% x 41.6 = 104 amps. A 100 amp breaker will work and still be within the electrical code ruling. Otherwise for 41.6 amps a 50 amp breaker will be sufficient.
What is the maximum amperage capacity of a 50 amp Pushmatic breaker?
The maximum amperage capacity of a 50 amp Pushmatic breaker is 50 amps.
What is the maximum amperage capacity of a 50 amp breaker panel?
The maximum amperage capacity of a 50 amp breaker panel is 50 amps.
What is the maximum current capacity that a 50 amp breaker can handle?
A 50 amp breaker can handle a maximum current capacity of 50 amps.
What is the average amp rating for a double oven?
50 amps
Can you put 10-3 UF cable on a 50 amp circuit breaker?
A #10 copper conductor with an insulation rating of 90 degrees C is rated at 30 amps. The only time that a breaker larger that the load maximum capacity can used is in motor connections. A breaker can be used sized at 250% of the motor's full load amperage. In this case a 50 amp breaker can be used on a #10 conductor if the motor's full load amps falls within the amperage's of 20 - 22 amps.
What is type of breaker for 41 amp's?
For a 41 amp load, you would typically use a 50 amp circuit breaker. The general rule is to select a breaker size that is 125% of the continuous load amps or equal to the load amps if it is not a continuous load. In this case, 41 amps is considered a continuous load, so you would round up to the nearest available breaker size, which is 50 amps.
What can you run off a 50 Amp breaker?
Anything that does not pull over 50 amps.
It is safe to use 8-3 wire on a 50 amp breaker?
No, it is not safe to use a #8 conductor on a 50 amp breaker. A #8 conductor is only rated at 45 amps capacity. By connecting it to a 50 amp breaker, which would trip at 50 amps on an overload, would overload the conductor by an extra 5 amps. This would be a conflict against the electrical code.
What is decimal value for 50 milliamps on 1 amp scale?
It is 0.050 amps.
