answersLogoWhite

0

That would be two driven axles.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is a Day cab twin screw?

"Day cab" refers to a truck which does not have an attached sleeper berth. "Twin screw"... on a single axle truck or a tandem axle with only one live axle (more common in Europe than the US), the driveshaft goes from the transmission output straight to the live axle differential. That's what's colloquially known as single screw. Most tandem axle trucks have both drive axles as live axles, and the driveshaft goes from the transmission output to the power divider (also known as interaxle differential), which in itself is a differential. Power is distributed from the power divider evenly to both axles in normal operation. This is what's known as a twin screw system.


What is the difference between single and double axle semi trucks?

One has a single drive axle, and the other has two. They're rated to haul different weights, and the tandem axle trucks usually have a twin screw system, where a power divider transfers power to both axles, whereas the single axle won't have the power divider.


What is the names if all the simple machine?

The Pulley is one of them. Wheel and axle. lever. screw. wedge. inclined plane.


How common is it for twins to consist of one boy and one girl?

It is relatively uncommon for twins to consist of one boy and one girl, occurring in about 1 out of every 50 twin births.


What axle drives a tandem truck?

There are two configurations for a tandem truck... the first - more common in Europe - is known as "single screw". The driveshaft goes to the differential of one axle, and that's the only live axle. In cases such as this, the additional axle is typically a lift axle. In N. America, tandem trucks normally use a twin screw configuration, where the driveshaft goes to a power divider... that power divider is essentially a differential, and has outputs going to both axles... ergo, both axles have power supplied to them at all times. A lot of people think that the power divider lock engages one of the axles.. this is not true.. it simply locks the outputs so that they always rotate at a matching speed.


What type of lever is a paperclip?

screw and wheel and axle A screw or a twisted inclined plane seems to be the answer you seek.


Simple machine that starts with I?

Inclined plane. One of the six; screw, wedge, incline plane, pulley, wheel and axle, and lever.


What is a twin screw in semi?

a truck or tractor with two rear axles both of which are being driven by the engine not just one of them


Which is example of a wheel and axle?

A classic example of a wheel and axle is a bicycle. The wheel rotates around the axle, allowing the bike to move forward efficiently. Another example is a screwdriver, where turning the handle (wheel) rotates the rod (axle) to drive a screw into a surface.


What other kind of simple machine is a screw related to?

It is one simple piece it does not need multiple pieces to make it.


What is a power divider in a truck when and how it should be used?

On a tandem truck, you have two configurations - single screw, where the driveshaft goes directly from the transmission output directly to the differential of a live axle... the other axle will be a dead axle, and does not propel the vehicle. The other configuration is known as twin screw, and this is what a 6x4 truck is. Both axles are live axles, and the driveshaft goes from the transmission output to the power divider input. The power divider is essentially a differential, which ensures that power is distributed evenly to both output shafts (one going to each axle differential). It's always in use. As for the lock, you use it as little as possible. Icy conditions, off-road use, or times when an axle is lifted off the ground would typically be when you'd use the PDL.


A scientific explanation for a simple machine?

A simple machine is a machine which does not use a motor and does not consist of more than one simple machine. There are six types of simple machines. Wheel and axle, pulley, inclined plane, lever, screw, and wedge. A complex machine uses a motor, and a compound is made up of one or more simple machines.