To adjust the headlights on a Peterbilt, first, park the truck on a level surface about 25 feet from a wall or garage door. Turn on the headlights and mark the center of the beam on the wall with tape. Adjust the headlights using the adjustment screws, typically located at the back of the headlight housing, until the top of the beam is aligned with the tape mark. Make sure to check both vertical and horizontal alignment for proper visibility.
I have no running lights on my 2006 Peterbilt 387 all of the lights work
How to adjust the head lights of 350e
With a hacksaw.
We had a light alignment problem on our 2007 S40 and they could not adjust due to the design of the head lights... The fix was to replace the left 2007 S40 head light with a 2008 S40 head light....
there are four screws behind the covers on the probe head lights put the car up to a building on a flat serface and adjust the lights to whare u wont them.
How do you ajust the door on a 379 pete
open hood on top of the asbly you will see the adjustment scrws turn these to adjust beam.
Check the dimmer setting for the dash lights. There should be a dial to adjust the brightness on the dash to the left of the steering wheel.
there are 2 hex head adjusting screws, one adjusts the up and down and the other right and left. park about 30 feet in front of the garage door and adjust them about level with themselves
Need to know the model. The 379 and 387 (just two examples) will differ.
how do i find a short in my head lights ,tail lights work but not my head lights
There is plug on air line marked drl next to fuse box