read the instructions or go get lessons. I'm not a pro.
how an i supposed to know
How to put chain sprocket on bobcat
To adjust the drive chain tension on a Bobcat 763G, first ensure the machine is on a flat surface and securely parked. Locate the tensioning bolts on the drive chain cover, then loosen the lock nuts. Adjust the tension by turning the bolts until the chain has the appropriate slack, usually around 1/2 to 1 inch of play, before retightening the lock nuts to secure the adjustment. Always refer to the operator's manual for specific tension specifications and procedures.
To tighten the drive chain on a Bobcat 743B skid steer, first, locate the chain tensioner near the drive sprocket. Use a wrench to loosen the tensioning bolts, then adjust the tensioner to achieve the desired chain tightness. Once the chain is properly tightened, retighten the bolts securely. Always refer to the operator's manual for specific tension specifications and procedures.
Yes
how do i install the timing pins on a875 bob cat skid loader to replace the timing belt
You can't adjust the chain on an LT80. You can buy an aftermarket chain tensioner if you wish to do this. This is the only way.
Have to remove chain links, there is no chain adjustment
To replace the drive chain on a Bobcat 632, first ensure the machine is turned off and secure it on a flat surface. Remove the necessary covers and any components obstructing access to the drive chain. Disconnect the old chain by removing the master link or cutting it, then install the new chain by threading it through the sprockets and securing it with a new master link. Finally, reassemble any removed parts, adjusting the chain tension as needed for optimal operation.
get on ur kneese
A 320 is a skid steer loader and uses bobcat # 7003026 oil kit. Drain and refill is recommended every time the track is removed but listed on the 1000 hour service.
Its a personal choice. I like direct, don't have to adjust or oil.
how do i adjust the chain on a Suzuki 230 quad runner