0
What else can I help you with?
What does braking distance mean?
Braking distance refers to the distance a vehicle will travel from the point when its brakes are fully applied to when it comes to a complete stop.
At an intersection with four-way stop signs, should the right of way be given to the vehicle?
At an intersection with four-way stop signs, the right of way should be given to the vehicle that arrives first and comes to a complete stop. If two vehicles arrive at the same time, the vehicle on the right has the right of way.
Is the critical factor in the distance it takes to stop your vehicle?
Yes, the critical factor in the distance it takes to stop your vehicle is your reaction time and the braking distance. Reaction time is the time it takes for you to perceive a hazard and apply the brakes, while braking distance is the distance your vehicle travels after applying the brakes until it comes to a complete stop. Both factors contribute to the overall stopping distance of your vehicle.
What is braking and braking distances?
Braking in a moving vehicle is applying the brakes to slow or halt movement, usually by depressing a pedal. The braking distance is the distance between the time the brakes are applied and the time the vehicle comes to a complete stop.
When the driver of a vehicle approaches an intersection the question of right of way should be determined by?
Which vehicle came to a complete stop first
How do yo know when a vehicle has come to a complete stop?
A vehicle has come to a complete stop when it is no longer moving and remains stationary for a few seconds. This can be confirmed by observing the absence of any forward or backward movement, as well as checking that the engine is off or the brake lights are not illuminated. Additionally, passengers and driver should feel no motion, indicating full cessation of movement.
The first crash is the vehicle crash-when the vehicle strikes and object causing it to buckle an bend as it hits and comes to an abrupt stop?
true
What causes a clicking noise in the middle front of car when I step on the break?
It is a safety-switch noise that does not allow you to put the vehicle in reverse until the vehicle comes to a complete stop. I was told that this is normal (2002-2006), but I do not understand how Honda could release a product that has such a noise.
How do you exit a vehicle?
If your buckled in , Un buckle yourself. Then open your door, If there is a door. To exit a vehicle make sure it is at a complete stop for safety.
Why is friction important in controlling your vehicle?
Friction allows the driver to slow down the vehicle when he/she applies the brakes and to put the car into a complete stop.
When a passenger vehicle crashes into an immovable object it will come to a complete stop in what length of time?
.5 second
What to do when your check engline lights comes on?
Vehicle warning lights are like traffic lights - green = go, Yellow = warning, Red = Stop the vehicle!!. Most vehicle manufacturers recommend that if the Check Engine Light Comes on the vehicle is safe to drive to your nearest repairer.. G'day fro Aus!!
