Search one of the Mercedes owners and enthusiast forums e.g. <http://www.mbclub.co.uk/>
Its located behind the instrument panel in the heater box. Yes you have to remove the dash and the center console.
You have to remove the dash and cowling underhood to remove the heater case. Then you would need to disassemble the heater case.
See answer I provided for 96 E320. they are the same. Ed Rivera
No the evaporator can NOT be accessed from the firewall, the only way to access the evap is to remove the dash. you can get to the expansion valve at the firewall though and replace that and the seals. But that is the only thing you can get to at the firewall. hope that helps.
wat does ETS dash light mean on a mercedes ml 320
Disconnect the negative cable. Remove any screw from the switch. Slide the switch from the dash. Remove the switch and insert the new switch.
The 1991 Mercedes-Benz 190 dashboard is held in place with six retaining bolts and 10 retaining clips. Remove the retaining bolts and pry outward on each retaining clip.
The fuel pump cut off switch for a Mercedes E Class can be found in one of two locations depending on the model. It can be located under the dash on the passenger side or behind the trunk panel.
To remove the in-dash phone in a 1995 Mercedes S420, first, ensure the vehicle is turned off and disconnect the battery for safety. Carefully pry off the trim panel surrounding the phone using a trim removal tool to avoid damaging it. Once the trim is removed, unscrew and disconnect the phone unit from its mounting bracket, followed by detaching any wiring harnesses. Finally, carefully pull the phone out of the dash.
To take apart the dash cluster of a 1999 Mercedes E300 TD, first disconnect the battery to ensure safety. Remove the trim surrounding the cluster by gently prying it off with a flat tool. Unscrew the screws securing the cluster, then carefully pull it out of the dashboard. Finally, disconnect the wiring harnesses at the back of the cluster to fully remove it.
remove the top dash panel closest to the windshield, then remove mounting screws for dash module.