answersLogoWhite

0

You are better off replacing the whole compressor. You can purchase a remanufactured compressor for $30 more and it comes with a 1 year warranty. Also replace the dryer/accumulator with this. It only has 4 bolts that hold the compressor on and it's a one for one swap.

First, remove the hoses from the dryer SLOWLY!!! This will allow the system to depressurize. Once the air stops hissing, remove the front and rear connectors from the dryer. Remove the 4 main bolts from the compressor and the one bolt holding the hose connections. Remove the serpentine belt and lift off the compressor.

CAUTION****** Drain the oil from the compressor and fill the new one with the same amount of new GM AC oil. Install the new dryer and the new compressor.

After installation, I suggest taking the vehicle to a service shop and have them vacuum the system and recharge it. You just saved yourself approximately $400 anyway, so having a professional perform these tasks is only a few dollars. This could save your new ac system in the long run.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you replace clutch on 2000 gmc jimmy 4x4 air conditioner?

To replace the clutch on a 2000 GMC Jimmy 4x4 air conditioner, first, disconnect the battery and remove the serpentine belt. Next, unbolt the compressor from its mounting and disconnect the electrical connector from the clutch. Use a puller tool to carefully remove the clutch from the compressor shaft, then install the new clutch by reversing the removal process, ensuring proper alignment with the compressor. Finally, reassemble all components, reconnect the battery, and check for proper operation.


How do you replace the heater core with air conditioning on a 1994 gm jimmy?

hi, i need to know how to replace the heater core with a/c on a 1994 gmc jimmy. a diagram would be helpful


How do you replace the heater core on a jimmy?

How do you replace the heater core on a jimmy?


Where is low pressure air conditioning fitting on GMC jimmy 1999?

On a 1999 GMC Jimmy, the low-pressure air conditioning fitting is typically located on the larger diameter aluminum line between the evaporator and the compressor. It's usually near the front of the engine compartment, often on the passenger side. You can identify it by its larger size compared to the high-pressure fitting and the blue or black plastic cap. Always consult the vehicle's service manual for specific details and diagrams.


How to replace a heater core in a 1992 GMC Jimmy?

I need to know how to replace a heater core in a 1992 GMC Jimmy?


Where is the egr valve on a 1994 jimmy?

It is located at the front of the intake manifold between the A/C compressor and the alternator


How do you replace the water pump on a 1988 GMC Jimmy?

I replaced the water pump on our 98 jimmy last motnth you will need to star with removing the raditor and the fan clutch fan. Once these items are removed you will have a clear picture on the water pump and the bolts that need to be removed.I am not a gear head and this took me two hours from start to finish.


How do you replace front wheel bearings on a 1999 Jimmy?

If it is 4x4, you have to replace the whole hub


Who will replace Conan O'Brien in 2009?

Jimmy Fallon


Why does my 1999 GMC Jimmy ac compressor clutch engages and then releases?

The A/C clutch engages and disengeges when the pressure in the system is too low. The most likely cause is that it needs to be recharged. If you recharge the system, make sure to use R134a and purchase at least a small pressure gauge. You can also purchase a hose that lets you fill the system right from the small cans of refrigerant. All of this can be purchased at your local auto parts store.


How do you replace an abs pump on a 1999 GMC Jimmy?

How do you change the abs pump on a 2001 gmc jimmy


What is wrong with your 1997 Jimmy when your abs light is on your power windows and your air conditioning wont work?

the battery is flat