The airbag light can be reset by connecting an ODBII reader. However the light is on because of a problem with the airbag system. The system needs to be checked to insure that the airbag works properly.
First things first it has to be hooked to a proper scanner and have the codes cleared. If the problem stays unsolved the light will come on immediately so watch out for that.
To reset the service light on a 2009 Ford Transit van, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within 10 seconds. Then, turn the ignition off and start the engine to check if the service light has reset. If the light remains on, repeat the process or consult your owner's manual for further instructions.
To reset the yellow spanner light on the dashboard of a Ford Transit van, first ensure that any underlying issues have been addressed. Then, turn the ignition key to the "On" position without starting the engine. Press the brake pedal and the accelerator pedal fully and hold them for about 10 seconds until the light goes off. Finally, turn off the ignition and restart the van to confirm the reset.
That is illegal
To reset the service light on a T350 Transit van, follow these steps: Turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off, then restart the engine to verify that the service light has been reset. If the light remains on, you may need to consult the vehicle's manual or a professional for further assistance.
To reset the airbag light on a Kia Sedona, first, ensure the ignition is off. Then, locate the airbag fuse in the fuse box and remove it for about 10 seconds before reinserting it. If the light remains on, you may need to use an OBD-II scanner to clear any stored codes. If the problem persists, it's advisable to consult a professional technician.
The air bag light is on because there is a problem with the air bag system. Until the problem is fixed the light will remain on and the air bag will not function if needed.
transit van dashboard lights flashing on and off and van not starting
its your service light
pull out light switch
To turn off the airbag light on a 1998 GMC Savana van, you typically need to diagnose the underlying issue first, as the light indicates a problem with the airbag system. Using an OBD-II scanner, you can check for error codes related to the airbag system and address any issues, such as faulty sensors or connections. Once the problem is resolved, the light can usually be reset with the scanner. If the light remains on, consulting a professional mechanic for further inspection may be necessary.
Ford Transit is a small light weight cargo van which has bee produced since 1965.