I don't think that will work unless you change over to rear disc brakes, the hub should not match.
To replace the rear brakes on a 2000 Isuzu Rodeo, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the rear wheels and the brake drum or caliper, depending on whether the vehicle has drum or disc brakes. Replace the brake shoes or pads, making sure to adjust any necessary components like the parking brake. Finally, reassemble everything, check for proper function, and test drive the vehicle to ensure the brakes are working correctly.
My 98 rodeo has disk brakes in the rear not drums,are there drums on some models.
Yes.
just replace the rear brakes
i need a diagram on how rear brakes are assembled
how to replace rear brakes on 1972 f600
Rear brakes do not have to be replaced too often. It's really hard to tell without looking at it. What you can do is to replace front brakes and test drive it, if you feel that your car brakes works just fine you do not need to replace rear brake shoes.
About $20 if you do it yourself. And you should replace the spring kit hardware also.
There is no adjustment on disc brakes. Replace them.
To replace the rear brakes on a Volvo 850 you must first remove the old brakes. Then connect all of the wirings to the new brakes including the brake fluid line and the connection for the brake pads.
What should it cost to replace rear brakes, drums and rotors, '96 Volvo 850 GLT.